[Gta04-owner] QtMoko patch to show pressure from BMP085 device

Radek Polak psonek2 at seznam.cz
Wed May 30 10:13:13 CEST 2012


On Tuesday, May 29, 2012 06:49:54 PM Neil Jerram wrote:

> > Btw the sysfs path is a bit different in 3.4 kernel so i might change it
> > if v45 will have 3.4 kernel which is quite likely.
> 
> Sure, makes sense.  (Do you have a trick for checking all sysfs paths when
> moving to a new kernel?  Maybe just "grep -r /sys *"?)

I just check what get's broken and fix it ;-)

> I'm building myself and using the update-qtmoko script now.  If v45 has
> a new kernel, I guess that means that I'll only have to download and
> unpack the qtmoko-fat-v45.tar.gz file.  Does that sound right, or are
> there other bits in the rootfs that I might miss?

You should just install the new kernel (or do apt-get update && apt-get 
upgrade). The uImage bin is then automaticaly copied to fat by gta04-init.

I think there are no more bits needed (except that i added bmp085 module to 
/etc/modules).

Regards

Radek
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.goldelico.com/pipermail/gta04-owner/attachments/20120530/faecf568/attachment.html>


More information about the Gta04-owner mailing list