[Gta04-owner] QtMoko v41

[Dr. H. Nikolaus Schaller]

Hi Michele,

Am 11.03.2012 um 22:16 schrieb Michele Brocco:
> 
> 
> 
> On 3/11/12, Dr. H. Nikolaus Schaller <hns at goldelico.com> wrote:
>> 
>> Am 11.03.2012 um 19:36 schrieb Michele Brocco:
>> 
>>> Hi,
>>> 
>>> I tested the NAND version and it works! My feeling is also that it is
>>> a bit faster. I am just trying to launch qtmoko from SD now through
>>> boot menu but it looks for an img1.rbg16z. And it is not able to find
>>> or load any. I tried to cp another rbg16z file as img1.rbgz16z but it
>>> still says:
>>> 
>>> ** Unable to read "img2.rgb16" from mmc 0:1 **
>>> reading img2.rgb16z
>>> MMC: block number 0x1000090d exceeds max(0x762000)
>>> MMC: block number 0x80040972 exceeds max(0x762000)
>>> MMC: block number 0x1000865 exceeds max(0x762000)
>>> 
>>> ** Unable to read "img2.rgb16z" from mmc 0:1 **
>>> NAND read: device 0 offset 0x1d0000, size 0x40000
>>> 262144 bytes read: OK
>>> Error: Bad gzipped data
>>> 
>>> When I do not start it from boot menu the sd version is loaded but the
>>> kernel loaded is not the one from the SD card is it seems.
>> 
>> Which u-boot/bootscr pair did you use?

> 
> it was the U-Boot 2011.03-rc1 with the corresponding boot.scr of the
> hardware testing revision

I have looked inside and found a big flaw (old code) in the boot.scr
when pressing the "boot MMC" button.

This is now fixed in the latest boot.scr (see other mail)