[Gta04-owner] Same GTA04 - now 33% faster :-)

[Dr. H. Nikolaus Schaller]

Am 25.07.2012 um 09:45 schrieb Dr. H. Nikolaus Schaller:

> The 800 / 1000 MHz variants of the DM3730 are not decoded by U-Boot,
> although there is one bit in some system control register (in the same
> 128 bit block as the DIE_ID) which distinguishes between the 800 and
> the 1 GHz specified chips. I think it is the "Speed Binned" register and/or the
> "Control Device Status Register 15:0 (Address 0x4800 244C)" in
> Table 1-6 of the TRM (SPRUGN4M).
> 
> I will take a look into the U-Boot/X-Loader code to fix that it is reported
> correctly.

Ok,
I have added such a detection [1]. It was completely missing and there
was just a 600/720 MHz detection for the OMAP3530. Well, it is based
on the Beagle Board code and there was no BB-XM with 800 MHz.

To check: install the new u-boot.bin [2] to SD (then you must press the AUX button
for boot from SD) or to NAND flash.

All GTA04A3 boards should report 800 MHz and some of the GTA04A4
boards or OpenPhoenux devices should report 1 GHz (serial number 0051 - 0080).

Maybe, such a detection can also be added to the kernel so that it shows
up in /proc/cpuinfo

Nikolaus

[1]: http://git.goldelico.com/?p=gta04-uboot.git;a=blobdiff;f=u-boot/arch/arm/cpu/armv7/omap3/sys_info.c;h=ba5b52872a5e37edc432d28bf64fe75becf4df4f;hp=549ac19189da84d290434aae087fe5283926780a;hb=81bf139de7e98f87bfa0c9f1b0dc08a3fd4ca393;hpb=8cc820a59fb315feef790a94150e16ba33303aae

[2]: http://download.goldelico.com/gta04/unstable/u-boot.bin