[Gta04-owner] Cpu only on 300Mhz on 3.7 kernel

[Radek Polak]

On Saturday, December 29, 2012 05:37:32 PM Radek Polak wrote:

> On Saturday, December 29, 2012 07:06:33 AM NeilBrown wrote:
> > Yes.  I discovered that I didn't include the last few patches that I'd
> > added to 3.5.  I've cherry-picked all in and push them out, so my
> > 'mainline' branch should work a bit better now.
> 
> Thanks Neil,
> i cant compile it for now:
> 
> radek at rp-thinkpad:~/linux-2.6$ make
> CROSS_COMPILE=/usr/bin/arm-linux-gnueabi- ARCH=arm uImage
> scripts/kconfig/conf --silentoldconfig Kconfig
>   CHK     include/generated/uapi/linux/version.h
>   CHK     include/generated/utsrelease.h
>   UPD     include/generated/utsrelease.h
> make[1]: `include/generated/mach-types.h' is up to date.
>   CALL    scripts/checksyscalls.sh
>   HOSTCC  scripts/pnmtologo
>   CHK     include/generated/compile.h
>   CC      init/version.o
>   LD      init/built-in.o
>   GEN     usr/initramfs_data.cpio
>   AS      usr/initramfs_data.o
>   LD      usr/built-in.o
>   CC      arch/arm/kernel/atags_parse.o
>   LD      arch/arm/kernel/built-in.o
>   CC      arch/arm/mach-omap2/board-omap3gta04.o
> arch/arm/mach-omap2/board-omap3gta04.c:72:22: error: plat/pwm.h: No such
> file or directory
> make[1]: *** [arch/arm/mach-omap2/board-omap3gta04.o] Error 1
> make: *** [arch/arm/mach-omap2] Error 2

I removed the line and it now compiles fine. The kernel seems to work just 
fine, i havent found any problem yet, so i think i will move to this 3.7 
kernel too.

Btw i have noticed one thing: after boot i have power ~160mA. But after 
suspend/resume cycle it is ~300. This is under QtMoko, i will try also with 
QtMoko disabled. However this is not related to 3.7 kernel, i have the same 
problem with older kernels too.

Regards

Radek