[Gta04-owner] Qt upgrade eating battery?

Boudewijn wankelwankel at yahoo.com
Fri Aug 10 23:42:48 CEST 2012


On Friday 10 August 2012 21:32:20 Neil Jerram wrote:
> The last 4 times I've resumed, I've seen these numbers after the "/" on
> the homescreen:
> 
> 334
> 219
> 317
> 204

Mine is usually /35 to /38. After restarting QtMoko, the before-slash value 
rises to 250, but usually it is between 170 and 220. Those values are on 
GTA04A3 with v46 on 32G class 10 uSD. 

Against better advice the numbers for a boot of v46 off NAND:
wakeup: /34, later up to 143/34 ; suspend
wakeup: 143/34, leave untouched, flashes off less than a second, 273/??? for a 
fraction of a second, suspend
wakeup 273/33, leave untouched, suspend
wakeup 273/34, leave untouched, suspend (again)
wakeup 34/34, later up to 144/34

profile in NAND is meeting, by default, as opposed to '' in uSD.


dmesg for NAND:

[    0.000000] Linux version 3.2.21-gta04 (root at qtmoko-buildhost) (gcc version 
4.6.2 (Debian 4.6.2-12) ) #1 PREEMPT Sat Jul 28 11:25:14 UTC 2012
[    0.000000] CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=10c53c7d
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing 
instruction cache
[    0.000000] Machine: GTA04
[    0.000000] Ignoring tag cmdline (using the default kernel command line)
[    0.000000] debug: ignoring loglevel setting.
[    0.000000] Reserving 12582912 bytes SDRAM for VRAM
[    0.000000] Memory policy: ECC disabled, Data cache writeback
[    0.000000] On node 0 totalpages: 128000
[    0.000000] free_area_init_node: node 0, pgdat c0728bbc, node_mem_map 
c094a000
[    0.000000]   Normal zone: 1024 pages used for memmap
[    0.000000]   Normal zone: 0 pages reserved
[    0.000000]   Normal zone: 126976 pages, LIFO batch:31
[    0.000000] OMAP3630 ES1.2 (l2cache iva sgx neon isp 192mhz_clk )
[    0.000000] Clocking rate (Crystal/Core/MPU): 26.0/332/600 MHz
[    0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[    0.000000] pcpu-alloc: [0] 0 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total 
pages: 126976
[    0.000000] Kernel command line: console=ttyO2,115200n8 mpurate=800 
vram=12M omapfb.rotate_type=0 omapdss.def_disp=lcd root=/dev/mmcblk0p2 rw 
rootfst
ype=ext3 rootwait twl4030_charger.allow_usb=1 musb_hdrc.preserve_vbus=1 
log_buf_len=8M ignore_loglevel
[    0.000000] log_buf_len: 8388608
[    0.000000] early log buf free: 2095644(99%)
[    0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[    0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.000000] Memory: 500MB = 500MB total
[    0.000000] Memory: 489764k/489764k available, 34524k reserved, 0K highmem
[    0.000000] Virtual kernel memory layout:
[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
[    0.000000]     fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
[    0.000000]     vmalloc : 0xe0800000 - 0xf8000000   ( 376 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xe0000000   ( 512 MB)
[    0.000000]     modules : 0xbf000000 - 0xc0000000   (  16 MB)
[    0.000000]       .text : 0xc0008000 - 0xc06262e8   (6265 kB)
[    0.000000]       .init : 0xc0627000 - 0xc06b2000   ( 556 kB)
[    0.000000]       .data : 0xc06b2000 - 0xc07293e0   ( 477 kB)
[    0.000000]        .bss : 0xc0729404 - 0xc0949a30   (2178 kB)
[    0.000000] NR_IRQS:410
[    0.000000] IRQ: Found an INTC at 0xfa200000 (revision 4.0) with 96 
interrupts
[    0.000000] Total of 96 interrupts on 1 active controller
[    0.000000] OMAP clockevent source: GPTIMER12 at 32768 Hz
[    0.000000] sched_clock: 32 bits at 32kHz, resolution 30517ns, wraps every 
131071999ms
[    0.000000] Console: colour dummy device 80x30
[    0.000183] Calibrating delay loop... 497.82 BogoMIPS (lpj=1941504)
[    0.032562] pid_max: default: 32768 minimum: 301
[    0.032745] Mount-cache hash table entries: 512
[    0.033111] CPU: Testing write buffer coherency: ok
[    0.034057] devtmpfs: initialized
[    0.035614] omap_hwmod: usbtll_fck: missing clockdomain for usbtll_fck.
[    0.037536] print_constraints: dummy: 
[    0.037780] NET: Registered protocol family 16
[    0.037933] GPMC revision 5.0
[    0.039794] OMAP GPIO hardware version 2.5
[    0.041046] running gta04_init()
[    0.041076] omap_mux_init: Add partition: #1: core, flags: 0
[    0.042053] Running gta04_init_rev()
[    0.042358] gta04_rev 3
[    0.044403] Reprogramming SDRC clock to 332000000 Hz
[    0.047332] Revision GTA04A3
[    0.048980] Found NAND on CS0
[    0.049011] Registering NAND on CS0
[    0.049346] gta04_init done...
[    0.049377] hw-breakpoint: debug architecture 0x4 unsupported.
[    0.053985] Calibrating delay loop (skipped) already calibrated this CPU
[    0.054077] Switched to new clocking rate (Crystal/Core/MPU): 26.0/332/800 
MHz
[    0.054229] OMAP DMA hardware revision 5.0
[    0.059082] bio: create slab <bio-0> at 0
[    0.060058] SCSI subsystem initialized
[    0.060974] usbcore: registered new interface driver usbfs
[    0.061065] usbcore: registered new interface driver hub
[    0.061218] usbcore: registered new device driver usb
[    0.061767] omap_i2c omap_i2c.1: bus 1 rev1.4.0 at 2600 kHz
[    0.066528] twl4030: PIH (irq 7) chaining IRQs 368..375
[    0.066619] twl4030: power (irq 373) chaining IRQs 376..383
[    0.067047] twl4030: gpio (irq 368) chaining IRQs 384..401
[    0.067718] machine_constraints_voltage: VUSB1V5: override min_uV, 1 -> 
1500000
[    0.067718] machine_constraints_voltage: VUSB1V5: override max_uV, 
2147483647 -> 1500000
[    0.067749] print_constraints: VUSB1V5: 1500 mV normal standby
[    0.068084] machine_constraints_voltage: VUSB1V8: override min_uV, 1 -> 
1800000
[    0.068115] machine_constraints_voltage: VUSB1V8: override max_uV, 
2147483647 -> 1800000
[    0.068115] print_constraints: VUSB1V8: 1800 mV normal standby
[    0.068420] machine_constraints_voltage: VUSB3V1: override min_uV, 1 -> 
3100000
[    0.068420] machine_constraints_voltage: VUSB3V1: override max_uV, 
2147483647 -> 3100000
[    0.068450] print_constraints: VUSB3V1: 3100 mV normal standby
[    0.069793] twl4030_usb twl4030_usb: Initialized TWL4030 USB module
[    0.070312] print_constraints: VMMC1: 1850 <--> 3150 mV at 3000 mV normal 
standby
[    0.070648] print_constraints: VDAC: 1800 mV normal standby
[    0.071136] print_constraints: VAUX2: 2800 mV normal 
[    0.071441] print_constraints: VDVI: 1800 mV normal standby
[    0.071746] print_constraints: VSIM: 2800 mV normal standby
[    0.072113] print_constraints: VAUX1: 2500 <--> 3000 mV at 3000 mV normal 
standby
[    0.072418] print_constraints: VAUX3: 2500 mV normal standby
[    0.072753] print_constraints: VAUX4: 2800 <--> 3150 mV at 2800 mV normal 
standby
[    0.084625] omap_i2c omap_i2c.2: bus 2 rev1.4.0 at 400 kHz
[    0.085052] omap_i2c omap_i2c.3: bus 3 rev1.4.0 at 100 kHz
[    0.085479] Advanced Linux Sound Architecture Driver Version 1.0.24.
[    0.086151] Switching to clocksource 32k_counter
[    0.094726] usbhs_omap usbhs_omap: xclk60mhsp2_ck set parentfailed 
error:-22
[    0.095153] musb-hdrc: version 6.0, ?dma?, otg (peripheral+host)
[    0.099700] musb-hdrc: ConfigData=0xde (UTMI-8, dyn FIFOs, bulk combine, 
bulk split, HB-ISO Rx, HB-ISO Tx, SoftConn)
[    0.099731] musb-hdrc: MHDRC RTL version 1.800 
[    0.099731] musb-hdrc: setup fifo_mode 4
[    0.099761] musb-hdrc: 28/31 max ep, 16384/16384 memory
[    0.100036] musb-hdrc musb-hdrc: USB OTG mode controller at fa0ab000 using 
PIO, IRQ 92
[    0.100341] NET: Registered protocol family 2
[    0.100524] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
[    0.100830] TCP established hash table entries: 16384 (order: 5, 131072 
bytes)
[    0.101104] TCP bind hash table entries: 16384 (order: 4, 65536 bytes)
[    0.101257] TCP: Hash tables configured (established 16384 bind 16384)
[    0.101257] TCP reno registered
[    0.101287] UDP hash table entries: 256 (order: 0, 4096 bytes)
[    0.101287] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[    0.101501] NET: Registered protocol family 1
[    0.118530] VFS: Disk quotas dquot_6.5.2
[    0.118591] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    0.119018] msgmni has been set to 956
[    0.120178] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 
253)
[    0.120208] io scheduler noop registered
[    0.120208] io scheduler deadline registered
[    0.120239] io scheduler cfq registered (default)
[    0.121368] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    0.122375] omap_uart.0: ttyO0 at MMIO 0x4806a000 (irq = 72) is a OMAP 
UART0
[    0.122619] omap_uart.1: ttyO1 at MMIO 0x4806c000 (irq = 73) is a OMAP 
UART1
[    0.122833] omap_uart.2: ttyO2 at MMIO 0x49020000 (irq = 74) is a OMAP 
UART2
[    0.849792] console [ttyO2] enabled
[    0.853668] omap_uart.3: ttyO3 at MMIO 0x49042000 (irq = 80) is a OMAP 
UART3
[    0.867065] brd: module loaded
[    0.873199] loop: module loaded
[    0.878997] omap2-nand driver initializing
[    0.884063] usbcore: registered new interface driver catc
[    0.889678] catc: v2.8:CATC EL1210A NetMate USB Ethernet driver
[    0.895904] usbcore: registered new interface driver kaweth
[    0.901733] pegasus: v0.6.14 (2006/09/27), Pegasus/Pegasus II USB Ethernet 
driver
[    0.909545] usbcore: registered new interface driver pegasus
[    0.915435] rtl8150: v0.6.2 (2004/08/27):rtl8150 based usb-ethernet driver
[    0.922637] usbcore: registered new interface driver rtl8150
[    0.928558] usbcore: registered new interface driver asix
[    0.934234] usbcore: registered new interface driver cdc_ether
[    0.940338] usbcore: registered new interface driver cdc_eem
[    0.946289] usbcore: registered new interface driver dm9601
[    0.952117] usbcore: registered new interface driver smsc95xx
[    0.958129] usbcore: registered new interface driver gl620a
[    0.963989] usbcore: registered new interface driver net1080
[    0.969909] usbcore: registered new interface driver plusb
[    0.975646] usbcore: registered new interface driver rndis_host
[    0.981872] usbcore: registered new interface driver cdc_subset
[    0.988189] usbcore: registered new interface driver zaurus
[    0.994049] usbcore: registered new interface driver MOSCHIP usb-ethernet 
driver
[    1.001770] cdc_ncm: 04-Aug-2011
[    1.005157] usbcore: registered new interface driver cdc_ncm
[    1.011291] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    2.023712] ehci-omap ehci-omap.0: OMAP-EHCI Host Controller
[    2.029846] ehci-omap ehci-omap.0: new USB bus registered, assigned bus 
number 1
[    2.037658] ehci-omap ehci-omap.0: irq 77, io mem 0x48064800
[    2.055084] ehci-omap ehci-omap.0: USB 2.0 started, EHCI 1.00
[    2.061126] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    2.068206] usb usb1: New USB device strings: Mfr=3, Product=2, 
SerialNumber=1
[    2.075714] usb usb1: Product: OMAP-EHCI Host Controller
[    2.081237] usb usb1: Manufacturer: Linux 3.2.21-gta04 ehci_hcd
[    2.087402] usb usb1: SerialNumber: ehci-omap.0
[    2.092620] hub 1-0:1.0: USB hub found
[    2.096557] hub 1-0:1.0: 3 ports detected
[    2.125366] Initializing USB Mass Storage driver...
[    2.130554] usbcore: registered new interface driver usb-storage
[    2.136810] USB Mass Storage support registered.
[    2.141906] mousedev: PS/2 mouse device common for all mice
[    2.148101] tsc2007_init()
[    2.151397] input: TSC2007 Touchscreen as /devices/virtual/input/input0
[    2.174926] input: bma150 as 
/devices/platform/omap/omap_i2c.2/i2c-2/2-0041/input/input1
[    2.184814] input: twl4030_pwrbutton as 
/devices/platform/omap/omap_i2c.1/i2c-1/1-0049/twl4030_pwrbutton/input/input2
[    2.196441] input: twl4030:vibrator as 
/devices/platform/omap/omap_i2c.1/i2c-1/1-0049/twl4030-audio/input/input3
[    2.211517] twl_rtc twl_rtc: rtc core: registered twl_rtc as rtc0
[    2.218902] i2c /dev entries driver
[    2.223052] Driver for 1-wire Dallas network protocol.
[    2.228668] APM Battery Driver
[    2.241516] OMAP Watchdog Timer Rev 0x31: initial timeout 60 sec
[    2.247863] cpuidle: using governor ladder
[    2.252136] cpuidle: using governor menu
[    2.256317] sdhci: Secure Digital Host Controller Interface driver
[    2.262756] sdhci: Copyright(c) Pierre Ossman
[    2.267578] sdhci-pltfm: SDHCI platform and OF driver helper
[    2.273681] Registered led device: gta04:red:aux
[    2.278594] Registered led device: gta04:green:aux
[    2.283660] Registered led device: gta04:red:power
[    2.288696] Registered led device: gta04:green:power
[    2.294006] machine_constraints_voltage: VWLAN: override min_uV, 2800000 -> 
3150000
[    2.302398] print_constraints: VWLAN: 3150 mV normal standby
[    2.308349] set_supply: VWLAN: supplied by VAUX4
[    2.313323] reg-fixed-voltage reg-fixed-voltage.1: vwlan supplying 
3150000uV
[    2.321044] OMAP DSS rev 2.0
[    2.345031] td028ttec1_panel_probe()
[    2.348754] jbt_reg_init()
[    2.407836] did jbt_reg_init()
[    2.411743] NAND device: Manufacturer ID: 0x2c, Chip ID: 0xbc (Micron NAND 
512MiB 1,8V 16-bit)
[    2.421356] Creating 5 MTD partitions on "omap2-nand.0":
[    2.426971] usb 1-2: new high-speed USB device number 2 using ehci-omap
[    2.433898] 0x000000000000-0x000000080000 : "X-Loader"
[    2.440460] 0x000000080000-0x000000260000 : "U-Boot"
[    2.446960] 0x000000260000-0x000000280000 : "U-Boot Env"
[    2.453308] 0x000000280000-0x000000680000 : "Kernel"
[    2.460327] 0x000000680000-0x000020000000 : "File System"
[    2.597747] usb 1-2: New USB device found, idVendor=0af0, idProduct=8800
[    2.605377] omap_hdq omap_hdq.0: OMAP HDQ Hardware Rev 0.5. Driver in 
Interrupt mode
[    2.613677] usb 1-2: New USB device strings: Mfr=3, Product=2, 
SerialNumber=0
[    2.621124] usb 1-2: Product: Globetrotter HSUPA Modem
[    2.626495] usb 1-2: Manufacturer: Option N.V.
[    2.814147] usbcore: registered new interface driver usbhid
[    2.819946] usbhid: USB HID core driver
[    2.825042] usbcore: registered new interface driver snd-usb-audio
[    2.836486] GTA04 OMAP3 SoC snd init
[    2.894836] bq27000-battery bq27000-battery: support ver. 1.2.0 enabled
[    2.929626] TPS Voice IF is tristated
[    2.936889] asoc: twl4030-hifi <-> omap-mcbsp-dai.1 mapping ok
[    2.944000] gta04-voice SoC init
[    2.948242] asoc: GTM601 <-> omap-mcbsp-dai.3 mapping ok
[    2.954467] gta04-headset SoC init
[    2.958770] asoc: W2CBW003 <-> omap-mcbsp-dai.2 mapping ok
[    2.965179] ALSA device list:
[    2.968261]   #0: gta04
[    2.970886]   #1: gta04-voice
[    2.973968]   #2: gta04-headset
[    2.977233] oprofile: hardware counters not available
[    2.982513] oprofile: using timer interrupt.
[    2.987182] TCP cubic registered
[    2.990539] NET: Registered protocol family 17
[    2.995361] NET: Registered protocol family 15
[    2.999969] lib80211: common routines for IEEE802.11 drivers
[    3.005889] lib80211_crypt: registered algorithm 'NULL'
[    3.012023] rfkill-regulator rfkill-regulator.0: GPS initialized
[    3.019439] rfkill-regulator rfkill-regulator.1: Bluetooth initialized
[    3.026733] Registering the dns_resolver key type
[    3.031707] VFP support v0.3: implementor 41 architecture 3 part 30 variant 
c rev 3
[    3.039733] ThumbEE CPU extension supported.
[    3.047424] sr_init: No PMIC hook to init smartreflex
[    3.052917] smartreflex smartreflex.0: omap_sr_probe: SmartReflex driver 
initialized
[    3.061157] smartreflex smartreflex.1: omap_sr_probe: SmartReflex driver 
initialized
[    3.069335] SmartReflex Class3 initialized
[    3.073699] clock: disabling unused clocks to save power
[    3.079895] registered taskstats version 1
[    3.099121] Console: switching to colour frame buffer device 60x40
[    3.110748] td028ttec1_panel_enable()
[    3.114532] gta04_enable_lcd()
[    3.131622] td028ttec1_panel_resume()
[    3.350402] omapdss DPI: Could not find exact pixel clock. Requested 22000 
kHz, got 22153 kHz
[    3.360534] gta04_enable_lcd()
[    3.364257] regulator_init_complete: VAUX3: disabling
[    3.370971] regulator_init_complete: VDAC: disabling
[    3.377166] regulator_init_complete: VMMC1: disabling
[    3.383728] input: gpio-keys as /devices/platform/gpio-keys/input/input4
[    3.392944] twl_rtc twl_rtc: setting system clock to 2012-08-10 21:18:31 
UTC (1344633511)
[    3.405700] Freeing init memory: 556K
[    3.720306] mmc0: host does not support reading read-only switch. assuming 
write-enable.
[    3.732635] mmc0: new high speed SDHC card at address e624
[    3.738830] mmcblk0: mmc0:e624 SU32G 29.7 GiB 
[    3.749389]  mmcblk0: p1 p2
[    2.626495] usb 1-2: Manufacturer: Option N.V.
[    2.814147] usbcore: registered new interface driver usbhid
[    2.819946] usbhid: USB HID core driver
[    2.825042] usbcore: registered new interface driver snd-usb-audio
[    2.836486] GTA04 OMAP3 SoC snd init
[    2.894836] bq27000-battery bq27000-battery: support ver. 1.2.0 enabled
[    2.929626] TPS Voice IF is tristated
[    2.936889] asoc: twl4030-hifi <-> omap-mcbsp-dai.1 mapping ok
[    2.944000] gta04-voice SoC init
[    2.948242] asoc: GTM601 <-> omap-mcbsp-dai.3 mapping ok
[    2.954467] gta04-headset SoC init
[    2.958770] asoc: W2CBW003 <-> omap-mcbsp-dai.2 mapping ok
[    2.965179] ALSA device list:
[    2.968261]   #0: gta04
[    2.970886]   #1: gta04-voice
[    2.973968]   #2: gta04-headset
[    2.977233] oprofile: hardware counters not available
[    2.982513] oprofile: using timer interrupt.
[    2.987182] TCP cubic registered
[    2.990539] NET: Registered protocol family 17
[    2.995361] NET: Registered protocol family 15
[    2.999969] lib80211: common routines for IEEE802.11 drivers
[    3.005889] lib80211_crypt: registered algorithm 'NULL'
[    3.012023] rfkill-regulator rfkill-regulator.0: GPS initialized
[    3.019439] rfkill-regulator rfkill-regulator.1: Bluetooth initialized
[    3.026733] Registering the dns_resolver key type
[    3.031707] VFP support v0.3: implementor 41 architecture 3 part 30 variant 
c rev 3
[    3.039733] ThumbEE CPU extension supported.
[    3.047424] sr_init: No PMIC hook to init smartreflex
[    3.052917] smartreflex smartreflex.0: omap_sr_probe: SmartReflex driver 
initialized
[    3.061157] smartreflex smartreflex.1: omap_sr_probe: SmartReflex driver 
initialized
[    3.069335] SmartReflex Class3 initialized
[    3.073699] clock: disabling unused clocks to save power
[    3.079895] registered taskstats version 1
[    3.099121] Console: switching to colour frame buffer device 60x40
[    3.110748] td028ttec1_panel_enable()
[    3.114532] gta04_enable_lcd()
[    3.131622] td028ttec1_panel_resume()
[    3.350402] omapdss DPI: Could not find exact pixel clock. Requested 22000 
kHz, got 22153 kHz
[    3.360534] gta04_enable_lcd()
[    3.364257] regulator_init_complete: VAUX3: disabling
[    3.370971] regulator_init_complete: VDAC: disabling
[    3.377166] regulator_init_complete: VMMC1: disabling
[    3.383728] input: gpio-keys as /devices/platform/gpio-keys/input/input4
[    3.392944] twl_rtc twl_rtc: setting system clock to 2012-08-10 21:18:31 
UTC (1344633511)
[    3.405700] Freeing init memory: 556K
[    3.720306] mmc0: host does not support reading read-only switch. assuming 
write-enable.
[    3.732635] mmc0: new high speed SDHC card at address e624
[    3.738830] mmcblk0: mmc0:e624 SU32G 29.7 GiB 
[    3.749389]  mmcblk0: p1 p2
[    3.844909] mmc1: new SDIO card at address 0001
[    5.068634] UBI: attaching mtd4 to ubi0
[    5.074096] UBI: physical eraseblock size:   131072 bytes (128 KiB)
[    5.081939] UBI: logical eraseblock size:    129024 bytes
[    5.088989] UBI: smallest flash I/O unit:    2048
[    5.095245] UBI: sub-page size:              512
[    5.101440] UBI: VID header offset:          512 (aligned 512)
[    5.108367] UBI: data offset:                2048
[    5.842193] UBI: max. sequence number:       1072
[    5.856842] UBI warning: print_rsvd_warning: cannot reserve enough PEBs for 
bad PEB handling, reserved 39, need 40
[    5.869384] UBI: attached mtd4 to ubi0
[    5.873291] UBI: MTD device name:            "File System"
[    5.879058] UBI: MTD device size:            505 MiB
[    5.884216] UBI: number of good PEBs:        4042
[    5.889099] UBI: number of bad PEBs:         2
[    5.893707] UBI: number of corrupted PEBs:   0
[    5.898345] UBI: max. allowed volumes:       128
[    5.903137] UBI: wear-leveling threshold:    4096
[    5.908020] UBI: number of internal volumes: 1
[    5.912628] UBI: number of user volumes:     1
[    5.917266] UBI: available PEBs:             0
[    5.921875] UBI: total number of reserved PEBs: 4042
[    5.927032] UBI: number of PEBs reserved for bad PEB handling: 39
[    5.933380] UBI: max/mean erase counter: 11/0
[    5.937896] UBI: image sequence number:  0
[    5.942169] UBI: background thread "ubi_bgt0d" started, PID 62
[    6.016632] UBIFS: mounted UBI device 0, volume 0, name "rootfs"
[    6.022888] UBIFS: file system size:   514547712 bytes (502488 KiB, 490 
MiB, 3988 LEBs)
[    6.031219] UBIFS: journal size:       9033728 bytes (8822 KiB, 8 MiB, 71 
LEBs)
[    6.038818] UBIFS: media format:       w4/r0 (latest is w4/r0)
[    6.044891] UBIFS: default compressor: lzo
[    6.049163] UBIFS: reserved for root:  0 bytes (0 KiB)
[    6.611145] udev[102]: starting version 164
[    7.674896] hso: drivers/net/usb/hso.c: Option Wireless
[    7.826904] ------------[ cut here ]------------
[    7.863586] usbcore: registered new interface driver hso
[    8.024261] WARNING: at net/wireless/reg.c:387 regulatory_init+0x80/0x114 
[cfg80211]()
[    8.096099] db.txt is empty, you should update it...
[    8.127502] Modules linked in: cfg80211(+) hso
[    8.207336] [<c00122a8>] (unwind_backtrace+0x0/0xe0) from [<c00310f8>] 
(warn_slowpath_common+0x4c/0x64)
[    8.333251] [<c00310f8>] (warn_slowpath_common+0x4c/0x64) from [<c0031190>] 
(warn_slowpath_fmt+0x2c/0x3c)
[    8.398986] [<c0031190>] (warn_slowpath_fmt+0x2c/0x3c) from [<bf02a140>] 
(regulatory_init+0x80/0x114 [cfg80211])
[    8.475128] [<bf02a140>] (regulatory_init+0x80/0x114 [cfg80211]) from 
[<bf02a054>] (cfg80211_init+0x54/0xc0 [cfg80211])
[    8.536895] [<bf02a054>] (cfg80211_init+0x54/0xc0 [cfg80211]) from 
[<c00084dc>] (do_one_initcall+0x90/0x160)
[    8.609771] [<c00084dc>] (do_one_initcall+0x90/0x160) from [<c005ebe0>] 
(sys_init_module+0x166c/0x1870)
[    8.684875] [<c005ebe0>] (sys_init_module+0x166c/0x1870) from [<c000d8c0>] 
(ret_fast_syscall+0x0/0x30)
[    8.727355] ---[ end trace 8478bd6fd40238c5 ]---
[    8.760772] cfg80211: Calling CRDA to update world regulatory domain
[    8.922821] libertas_sdio: Libertas SDIO driver
[    8.927551] libertas_sdio: Copyright Pierre Ossman
[   11.391326] libertas_sdio mmc1:0001:1: (unregistered net_device): 
00:19:88:3d:ff:e1, fw 9.70.7p0, cap 0x00000303
[   11.492889] libertas_sdio mmc1:0001:1: (unregistered net_device): PREP_CMD: 
command 0x00a3 failed: 2
[   11.565734] libertas_sdio mmc1:0001:1: wlan0: Marvell WLAN 802.11 adapter
[   12.386962] usb0: MAC b6:c8:ab:ac:44:7f
[   12.396759] usb0: HOST MAC 46:0d:9e:67:69:eb
[   12.406768]  gadget: Ethernet Gadget, version: Memorial Day 2008
[   12.413055]  gadget: g_ether ready
[   12.431304] musb-hdrc musb-hdrc: MUSB HDRC host driver
[   12.447692] musb-hdrc musb-hdrc: new USB bus registered, assigned bus 
number 2
[   12.461547] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[   12.468597] usb usb2: New USB device strings: Mfr=3, Product=2, 
SerialNumber=1
[   12.485931] usb usb2: Product: MUSB HDRC host driver
[   12.491088] usb usb2: Manufacturer: Linux 3.2.21-gta04 musb-hcd
[   12.505889] usb usb2: SerialNumber: musb-hdrc
[   12.513366] hub 2-0:1.0: USB hub found
[   12.521148] hub 2-0:1.0: 1 port detected
[   13.644287] NET: Registered protocol family 10
[   13.654846] ADDRCONF(NETDEV_UP): usb0: link is not ready
[   14.472290] sshd (957): /proc/957/oom_adj is deprecated, please use 
/proc/957/oom_score_adj instead.
[   14.713287] Bluetooth: Core ver 2.16
[   14.723297] NET: Registered protocol family 31
[   14.728027] Bluetooth: HCI device and connection manager initialized
[   14.734649] Bluetooth: HCI socket layer initialized
[   14.739715] Bluetooth: L2CAP socket layer initialized
[   14.744995] Bluetooth: SCO socket layer initialized
[   14.755249] Bluetooth: HCI UART driver ver 2.2
[   14.759918] Bluetooth: HCI H4 protocol initialized
[   14.764892] Bluetooth: HCI BCSP protocol initialized
[   14.770080] Bluetooth: HCILL protocol initialized
[   14.804382] Bluetooth: RFCOMM TTY layer initialized
[   14.809722] Bluetooth: RFCOMM socket layer initialized
[   14.815155] Bluetooth: RFCOMM ver 1.11
[   14.948211] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   14.972381] Bluetooth: BNEP filters: protocol multicast
[   17.804901] bmp085 2-0077: BMP085 ver. 2.0 found.
[   17.816009] bmp085 2-0077: Successfully initialized bmp085!
[   17.821929] i2c i2c-2: new_device: Instantiated device bmp085 at 0x77
[   23.996734] i2c i2c-2: Failed to register i2c client bmp085 at 0x77 (-16)
[   29.661071] i2c i2c-2: Failed to register i2c client bmp085 at 0x77 (-16)
[   33.234649]  gadget: high-speed config #1: CDC Ethernet (ECM)
[   33.250579] ADDRCONF(NETDEV_CHANGE): usb0: link becomes ready
[   35.485656] i2c i2c-2: Failed to register i2c client bmp085 at 0x77 (-16)
[   41.122070] i2c i2c-2: Failed to register i2c client bmp085 at 0x77 (-16)
[   44.203491] usb0: no IPv6 routers present
[   46.804595] i2c i2c-2: Failed to register i2c client bmp085 at 0x77 (-16)
[   52.404449] i2c i2c-2: Failed to register i2c client bmp085 at 0x77 (-16)
[   58.102416] i2c i2c-2: Failed to register i2c client bmp085 at 0x77 (-16)
[   63.798065] i2c i2c-2: Failed to register i2c client bmp085 at 0x77 (-16)
[   69.511383] i2c i2c-2: Failed to register i2c client bmp085 at 0x77 (-16)
[   75.582977] i2c i2c-2: Failed to register i2c client bmp085 at 0x77 (-16)
[   81.301788] i2c i2c-2: Failed to register i2c client bmp085 at 0x77 (-16)
[   87.067413] i2c i2c-2: Failed to register i2c client bmp085 at 0x77 (-16)
[   93.245635] i2c i2c-2: Failed to register i2c client bmp085 at 0x77 (-16)

... and the chorus continues with just that.
-------------- next part --------------
A non-text attachment was scrubbed...
Name: smime.p7s
Type: application/pkcs7-signature
Size: 1967 bytes
Desc: not available
URL: <http://lists.goldelico.com/pipermail/gta04-owner/attachments/20120810/5e672684/attachment-0001.bin>


More information about the Gta04-owner mailing list