[Gta04-owner] Broken devices

[Dr. H. Nikolaus Schaller]

David,
any success / failure?

Nikolaus

Am 05.11.2011 um 15:44 schrieb Dr. H. Nikolaus Schaller:

> Hi David,
> 
> Am 05.11.2011 um 08:25 schrieb David Lanzendoerfer:
> 
>>> Hi David,
>> Ni Nikolaus
>> 
>>>>> Any other idea?
>>> Could you please be much more specific?
>>> Then, we can help you with much less guessing.
>> I tried to insert battery while keeping pressed all the switches on the board.
>> 
>>>>> I now tried this procedure. 
>>> Which procedure?
>> Booting with AUX pressed
> 
> Ok, I see.
> 
>> 
>>> Which u-Boot version? Where did you download it from?
>> None yet, but I'll use the one from Goldelico's repository.
>> http://download.goldelico.com/gta04/20110926-GTA04A3-HW-Tester/
>> 
>> The one here should be ok, right?
> 
> Yes.
> 
>> 
>>> Which serial tool(s) did you use?
>> I'm using Minicom.
>> 
>>> Which (host) console messages when running the serial tool?
>> I guess I'll use the ones described in the BeagleBoard wiki.
>> 
>>> You could also try to load the u-monitor. This is a very simple command
>>> line interpreter which should print a "$" and wait for a command line.
>>> E.g. "m" should print the PinMux settings. The special feature is that it
>>> just resides inside the RAM on the SoC - and does not need the Package on
>>> Package Memory or any peripherals besides the RS232 interface.
>> Where is this u-monitor located on your repo?
> 
> I have written a Documentation page specific for the GTA04:
> 
> http://projects.goldelico.com/p/gta04-main/page/SerialBoot/
> 
> I am not sure if it is exactly correct or some important steps are
> missing. If you find need for corrections, please let us all know...
> 
> Good luck,
> Nikolaus
> 
> _______________________________________________
> Gta04-owner mailing list
> Gta04-owner at goldelico.com
> http://lists.goldelico.com/mailman/listinfo/gta04-owner