Do you have an up to date uboot, which provides the 'mux=' parameter? Because that is how we detect the device variant. You can check it via /proc/cmdline BR, Lukas <span style="font-family:Prelude, Verdana, san-serif;"> <span id="signature"><div id="no_signature" style="overflow:hidden;"></div><span style="color:navy; font-family:Prelude, Verdana, san-serif; "><hr align="left" style="width:75%">Am 19.03.2014 00:59 schrieb Neil Jerram <neil@ossau.homelinux.net>:  Neil Jerram <neil@ossau.homelinux.net> writes:
 
 > "Lukas Maerdian" <luk@slyon.de> writes:
 >
 >> Did you do anything special to get apps from frdoid installed, like setting up
 >> some partitions?
 >>
 >> If so, how did you do it? Because this wasn't woking in my test and I want to
 >> work on it, once I return from my vacations.
 >>
 >> BR, Lukas
 >
 > No, it just worked.  This is with the single partition
 > gta04-rootfs.tar.gz, which I unpacked to my /dev/mmcblk0p1 using tar
 > jxvf (just as you'd expect).
 
 On the other hand, I think I'm still seeing that Replicant isn't picking
 up my battery properly.  Here's an adb shell session that I just did:
 
 root@android:/ # lsmod    
 libertas_sdio 14649 0 - Live 0x00000000
 libertas 98252 1 libertas_sdio, Live 0x00000000
 lib80211 3235 1 libertas, Live 0x00000000
 hci_uart 11315 0 - Live 0x00000000
 bluetooth 179627 1 hci_uart, Live 0x00000000
 
 So, no battery module is initially loaded.
 
 root@android:/ # modprobe bq27x00_battery                                      
 root@android:/ # lsmod                                                         
 bq27x00_battery 5567 0 - Live 0x00000000
 libertas_sdio 14649 0 - Live 0x00000000
 libertas 98252 1 libertas_sdio, Live 0x00000000
 lib80211 3235 1 libertas, Live 0x00000000
 hci_uart 11315 0 - Live 0x00000000
 bluetooth 179627 1 hci_uart, Live 0x00000000
 
 It is loaded now.
 
 root@android:/ # cat /sys/class/power_supply/bq27000-battery/uevent                                                <
 POWER_SUPPLY_NAME=bq27000-battery
 POWER_SUPPLY_STATUS=Full
 POWER_SUPPLY_PRESENT=1
 POWER_SUPPLY_VOLTAGE_NOW=4197000
 POWER_SUPPLY_CURRENT_NOW=-53371
 POWER_SUPPLY_CAPACITY=100
 POWER_SUPPLY_CAPACITY_LEVEL=Full
 POWER_SUPPLY_TEMP=401
 POWER_SUPPLY_TIME_TO_FULL_NOW=0
 POWER_SUPPLY_TECHNOLOGY=Li-ion
 POWER_SUPPLY_CHARGE_FULL=1085637
 POWER_SUPPLY_CHARGE_NOW=1085637
 POWER_SUPPLY_CHARGE_FULL_DESIGN=1233792
 POWER_SUPPLY_CYCLE_COUNT=206
 POWER_SUPPLY_ENERGY_NOW=3902580
 POWER_SUPPLY_POWER_AVG=0
 POWER_SUPPLY_HEALTH=Good
 root@android:/ # cat /sys/class/power_supply/bq27000-battery/uevent            
 POWER_SUPPLY_NAME=bq27000-battery
 POWER_SUPPLY_STATUS=Full
 POWER_SUPPLY_PRESENT=1
 POWER_SUPPLY_VOLTAGE_NOW=4197000
 POWER_SUPPLY_CURRENT_NOW=-57120
 POWER_SUPPLY_CAPACITY=100
 POWER_SUPPLY_CAPACITY_LEVEL=Full
 POWER_SUPPLY_TEMP=404
 POWER_SUPPLY_TIME_TO_FULL_NOW=0
 POWER_SUPPLY_TECHNOLOGY=Li-ion
 POWER_SUPPLY_CHARGE_FULL=1085637
 POWER_SUPPLY_CHARGE_NOW=1085637
 POWER_SUPPLY_CHARGE_FULL_DESIGN=1233792
 POWER_SUPPLY_CYCLE_COUNT=206
 POWER_SUPPLY_ENERGY_NOW=3902580
 POWER_SUPPLY_POWER_AVG=0
 POWER_SUPPLY_HEALTH=Good
 root@android:/ # 
 
 The uevent file reports good-looking battery information, including (i)
 that it's almost fully charged and (ii) a net negative charging current.
 
 But there's no icon in the UI that looks like a full battery, and if I
 go to Settings / Battery, it says "0% - Unknown".
 
 Any ideas?
 
 Thanks,
         Neil
 _______________________________________________
 Community mailing list
 Community@openphoenux.org
 http://lists.goldelico.com/mailman/listinfo/community
 http://www.openphoenux.org