[Om-beagle-panda-hybrid] Bill of material

Dr. H. Nikolaus Schaller hns at goldelico.com
Wed Nov 24 11:11:02 CET 2010


Hello Xavier,
welcome on this list!

Am 24.11.2010 um 10:52 schrieb CHAZE Xavier:

> Hello,
> I am very interrested by you project. I own a pandaboard and I would be happy to contribute !

Great!

> Is it possible to get the BOM,  I also need the reference of the connectors and stack connectors (1.27 and 2.54 pitch).

Yes, please look for the schematics of the board at

	http://projects.goldelico.com/p/ombeagle/downloads/30/

and

	http://projects.goldelico.com/p/ombeagle/page/ConnectToBeagleboardXM/

how it is installed on a BeagleBoard XM. It *should* be more or less the same
for a PandaBoard. Except that Panda does not have presoldered sockets. So it is
similar to the BeagleBoard-C4.

But I think we have to verify this first.

1) are the connectors at the same position?
2) does the 1.27 and the 2.54 mm expansion socket have the same/compatible signal assignment?
3) enabling the display port on the PandaBoard needs to remove/resolder some 0201 resistors - share experience
4) where to get the sockets (I think there is a part number mentioned in the BB-XM Manual)

And, we (still) have some of the Display expansion board kits in our shop. These include
2.54 and 1.27 sockets for the BB-C4.

So I would suggest that you familiarize yourself with the project page and ask
what you don't understand or is not written down.

Best regards,
Nikolaus


-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.goldelico.com/pipermail/om-beagle-panda-hybrid/attachments/20101124/bfbac7a8/attachment.html>


More information about the Om-beagle-panda-hybrid mailing list