[Letux-kernel] [PATCH v3 4/5] DTS: gta04: add serdev node for w2sg00x4

H. Nikolaus Schaller hns at goldelico.com
Wed Nov 15 16:19:12 CET 2017


GTA04 has a W2SG0004/84 connected to UART2 of the OMAP3
processor. A GPIO can pulse the on/off toggle switch.

The VSIM regulator is used to power on/off the LNA of an external
active GPS antenna so that a driver can turn the LNA off if GPS is
not needed to save battery energy.

Signed-off-by: H. Nikolaus Schaller <hns at goldelico.com>
---
 arch/arm/boot/dts/omap3-gta04.dtsi | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/arch/arm/boot/dts/omap3-gta04.dtsi b/arch/arm/boot/dts/omap3-gta04.dtsi
index 4504908c23fe..e967d738aaaf 100644
--- a/arch/arm/boot/dts/omap3-gta04.dtsi
+++ b/arch/arm/boot/dts/omap3-gta04.dtsi
@@ -477,6 +477,12 @@
 &uart2 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&uart2_pins>;
+
+	gps: gps {
+		compatible = "wi2wi,w2sg0004";
+		lna-supply = <&vsim>;   /* LNA regulator */
+		enable-gpios = <&gpio5 17 GPIO_ACTIVE_HIGH>;    /* GPIO_145: trigger for turning on/off w2sg0004 */
+	};
 };
 
 &uart3 {
-- 
2.12.2



More information about the Letux-kernel mailing list