[Letux-kernel] [PATCH v3 1/8] drivers:input:tsc2007: add new common binding names, pre-calibration, flipping and rotation

H. Nikolaus Schaller hns at goldelico.com
Sat Sep 24 07:28:48 CEST 2016


Hi,

> Am 24.09.2016 um 00:47 schrieb Rob Herring <robh at kernel.org>:
> 
> On Fri, Sep 23, 2016 at 02:41:09PM +0200, H. Nikolaus Schaller wrote:
>> commit b98abe52fa8e ("Input: add common DT binding for touchscreens")
>> introduced common DT bindings for touchscreens [1] and a helper function to
>> parse the DT.
>> 
>> commit ed7c9870c9bc ("Input: of_touchscreen - add support for inverted / swapped axes")
>> added another helper for parsing axis inversion and swapping
>> and applying them to x and y coordinates.
>> 
>> Both helpers have been integrated to accommodate any orientation of the
>> touch panel in relation to the LCD.
>> 
>> A new feature is to introduce scaling the min/max ADC values to the screen
>> size.
>> 
>> This makes it possible to pre-calibrate the touch so that is (almost)
>> exactly matches the LCD pixel coordinates it is glued onto. This allows to
>> well enough operate the touch before a user space calibration step can
>> improve the precision.
>> 
>> Finally, calculate_pressure has been renamed to calculate_resistance
>> because that is what it is doing.
> 
> Seems like you are breaking compatibility with old DTs. I can't tell for 
> sure though.

There is code to take missing values as 0 or maximum. So this will scale 1:1
and should not break old DTs.

> 
>> 
>> [1]: Documentation/devicetree/bindings/input/touchscreen/touchscreen.txt
>> 
>> Signed-off-by: H. Nikolaus Schaller <hns at goldelico.com>
>> ---
>> .../bindings/input/touchscreen/tsc2007.txt         |  20 ++--
>> drivers/input/touchscreen/tsc2007.c                | 126 +++++++++++++++++----
>> include/linux/i2c/tsc2007.h                        |   8 ++
>> 3 files changed, 123 insertions(+), 31 deletions(-)
>> 
>> diff --git a/Documentation/devicetree/bindings/input/touchscreen/tsc2007.txt b/Documentation/devicetree/bindings/input/touchscreen/tsc2007.txt
>> index ec365e1..6e9fd55 100644
>> --- a/Documentation/devicetree/bindings/input/touchscreen/tsc2007.txt
>> +++ b/Documentation/devicetree/bindings/input/touchscreen/tsc2007.txt
>> @@ -6,6 +6,7 @@ Required properties:
>> - ti,x-plate-ohms: X-plate resistance in ohms.
>> 
>> Optional properties:
>> +- generic touch screen properties: see touchscreen binding [2].
>> - gpios: the interrupt gpio the chip is connected to (trough the penirq pin).
>>   The penirq pin goes to low when the panel is touched.
>>   (see GPIO binding[1] for more details).
>> @@ -13,17 +14,20 @@ Optional properties:
>>   (see interrupt binding[0]).
>> - interrupts: (gpio) interrupt to which the chip is connected
>>   (see interrupt binding[0]).
>> -- ti,max-rt: maximum pressure.
>> -- ti,fuzzx: specifies the absolute input fuzz x value.
>> -  If set, it will permit noise in the data up to +- the value given to the fuzz
>> -  parameter, that is used to filter noise from the event stream.
>> -- ti,fuzzy: specifies the absolute input fuzz y value.
>> -- ti,fuzzz: specifies the absolute input fuzz z value.
>> +- ti,max-rt: maximum pressure resistance above which samples are ignored
>> +  (default: 4095).
>> +- ti,report-resistance: report resistance (no pressure = max_rt) instead
>> +  of pressure (no pressure = 0).
>> +- ti,min-x: minimum value reported by X axis ADC (default 0).
>> +- ti,max-x: maximum value reported by X axis ADC (default 4095).
>> +- ti,min-y: minimum value reported by Y axis ADC (default 0).
>> +- ti,max-y: maximum value reported by Y axis ADC (default 4095).
> 
> Seems like these could be common too. They make more sense than giving x 
> and y sizes in pixel units which really should come from the panel.

No. They have a different purpose!

You need to scale values like this:

ti,min-x   ->   0
x          ->   some value between 0 and touchscreen-size-x
ti,max-x   ->   touchscreen-size-x

So the ti, values describe the ADC raw values while the common bindings
describe the size in input-event coordinates.

So we need both specified: raw values and pixel values.

> 
>> - ti,poll-period: how much time to wait (in milliseconds) before reading again the
>> -  values from the tsc2007.
>> +  values from the tsc2007 (default 1).
>> 
>> [0]: Documentation/devicetree/bindings/interrupt-controller/interrupts.txt
>> [1]: Documentation/devicetree/bindings/gpio/gpio.txt
>> +[2]: Documentation/devicetree/bindings/input/touchscreen/touchscreen.txt
>> 
>> Example:
>> 	&i2c1 {
>> @@ -35,6 +39,8 @@ Example:
>> 			interrupts = <0x0 0x8>;
>> 			gpios = <&gpio4 0 0>;
>> 			ti,x-plate-ohms = <180>;
>> +			touchscreen-size-x = <640>;
>> +			touchscreen-size-y = <480>;
>> 		};
>> 
>> 		/* ... */

BR,
Nikolaus



More information about the Letux-kernel mailing list