[Letux-kernel] [PATCH v2] phy-twl4030-usb: better handle musb_mailbox() failure

Kishon Vijay Abraham I kishon at ti.com
Wed Sep 14 07:23:10 CEST 2016


On Monday 12 September 2016 08:56 PM, Tony Lindgren wrote:
> Hi,
> * Kishon Vijay Abraham I <kishon at a0393678ub> [160910 05:23]:
>> On Tue, Aug 23, 2016 at 03:57:24PM -0700, Tony Lindgren wrote:
>>> * Andreas Kemnade <andreas at kemnade.info> [160822 12:25]:
>>>> setting twl->linkstat = MUSB_UNKNOWN upon error in musb_mailbox as
>>>> introduced in
>>>> commit 12b7db2bf8b8 ("usb: musb: Return error value from musb_mailbox")
>>>> causes twl4030_usb_irq() to not detect a state change form cable connected
>>>> to cable disconnected after such an error so that
>>>> pm_runtime_put_autosuspend() will not be called and the usage counter
>>>> gets unbalanced. Such errors happen e.g. if the omap2430 module is not
>>>> (yet) loaded during plug/unplug events.
>>>> This patch introduces a flag instead that indicates whether there is
>>>> information for the musb_mailbox pending and calls musb_mailbox() if
>>>> that flag is set.
>>> Still works for me for PM:
>>> Tested-by: Tony Lindgren <tony at atomide.com>
>> merged, thanks.
> Just to be sure we're on the same page.. Kishon, this one is needed as a
> regression fix for v4.8-rc cycle in addition to the "usb: musb: Fix
> unbalanced platform_disable" that I've been working on.

Okay. Thank you for letting me know this. I see still there are discussions in
the "usb: musb: Fix unbalanced platform_disable" thread. Would it be a problem
if this patch goes without the platform_disable patch?


More information about the Letux-kernel mailing list