[Letux-kernel] OMAP3 SGX on latest kernels
aford173 at gmail.com
Mon Oct 31 23:53:45 CET 2016
On Mon, Oct 31, 2016 at 4:52 PM, H. Nikolaus Schaller <hns at goldelico.com> wrote:
> Hi Adam,
> I just found your attempt to get SGX working on OMAP3.
> [RFC] ARM: OMAP3: Add device tree and pdata hooks to enable SGX on OMAP3
> I am trying for a while to achieve the same.
> But Graphics_SDK_5_01_01_02 (AFAIK the latest for OMAP3/DM3730) seems to
> call functions that require some reset-controller to be enabled in most
> modern kernels or in other words they don't work without. Because they
> directly check for "resets" and "reset-names" properties.
> Therefore I started to work on the reset-controller which Tero Kristo
> has proposed a while ago (Sept 2015). Officially, it is on hold because
> they want to fix clock hwmods first. But it does not boot on v4.9-rc2
> (it boots on v4.3).
I am working on the 4.4.y long term kernel so I'm going to try and
experiment with that.
> So what is your status of getting SGX running?
Unfortunately, the customer that I was working with decided not to
pursue it any further, but I'll gladly try to help with what you've
> My latest DT patch looks like this (funnily I had the same typo of a missing
> 0 of 50000000):
> What I wonder is why you have a different interrupt. Unfortunately I don't
> remember where I got the <37> from. But there is some table to cross-check
> with the TRM.
I think the different processors have different interrupts. I am
using the DM3730 which is 21, but I could be wrong or misinterpreting
the datasheet. Which OMAP3 were you targeting?
> The full patches I work on are here:
Thanks for your feedback. I'm going to pull them down and see what
happens with the 4.4 LTS kernel
More information about the Letux-kernel