[Letux-kernel] [PATCH v6 2/2] Bindings documentation for ISSI is31fl319x driver

H. Nikolaus Schaller hns at goldelico.com
Fri Jul 22 08:42:06 CEST 2016


Hi,

> Am 22.07.2016 um 08:36 schrieb Jacek Anaszewski <j.anaszewski at samsung.com>:
> 
> On 07/20/2016 03:24 AM, Rob Herring wrote:
>> On Tue, Jul 19, 2016 at 01:47:31PM +0200, H. Nikolaus Schaller wrote:
>>> Signed-off-by: H. Nikolaus Schaller <hns at goldelico.com>
>>> ---
>>>  .../devicetree/bindings/leds/is31fl319x.txt        | 59 ++++++++++++++++++++++
>>>  1 file changed, 59 insertions(+)
>>>  create mode 100644 Documentation/devicetree/bindings/leds/is31fl319x.txt
>>> 
>>> diff --git a/Documentation/devicetree/bindings/leds/is31fl319x.txt b/Documentation/devicetree/bindings/leds/is31fl319x.txt
>>> new file mode 100644
>>> index 0000000..03287c0
>>> --- /dev/null
>>> +++ b/Documentation/devicetree/bindings/leds/is31fl319x.txt
>>> @@ -0,0 +1,59 @@
>>> +LEDs connected to is31fl319x LED controller chip
>>> +
>>> +Required properties:
>>> +- compatible : Should be any of
>>> +	"issi,is31fl3190"
>>> +	"issi,is31fl3191"
>>> +	"issi,is31fl3193"
>>> +	"issi,is31fl3196"
>>> +	"issi,is31fl3199"
>>> +	"si-en,sn3199".
>>> +- #address-cells: Must be 1.
>>> +- #size-cells: Must be 0.
>>> +- reg: 0x64, 0x65, 0x66, 0x67.
>> 
>> This is an OR or AND? OR it seems. With that,
> 
> Nikolaus, could you please make it explicit?

Yes, Rob's intuition is right. An AND does
obviously not make sense for a reg property.

It is an OR.

So if you perfer, please substitute 

- reg: 0x64, 0x65, 0x66, or 0x67.

BR,
Nikolaus



More information about the Letux-kernel mailing list