[Letux-kernel] [PATCH] musb: omap2430: do not assume balanced enable()/disable()
tony at atomide.com
Wed Aug 3 08:30:16 CEST 2016
* Andreas Kemnade <andreas at kemnade.info> [160802 08:14]:
> On Tue, 2 Aug 2016 03:33:34 -0700
> Tony Lindgren <tony at atomide.com> wrote:
> > * Andreas Kemnade <andreas at kemnade.info> [160729 11:14]:
> > > The code assumes that omap2430_musb_enable() and
> > > omap2430_musb_disable() is called in a balanced way. The
> > > That fact is broken by the fact that musb_init_controller() calls
> > > musb_platform_disable() to switch from unknown state to off state.
> > OK, some spelling issues with the above paragraph though :)
> > > That means that phy_power_off() is called first so that
> > > phy->power_count gets -1 and the phy is not enabled on
> > > phy_power_on(). In the probably common case of using the
> > > phy_twl4030, that prevents also charging the battery and so makes
> > > further kernel debugging hard.
> > Is this with v4.7 kernel? Also, care to describe how you hit this
> > and on which hardware? Just wondering..
> I got this error on the Openphoenux GTA04 phone. It has a DM3730
> SoC and a TPS65950 companion. Severe charging problems were already
> observed with the 4.4rc1. I do not know if that already was exactly
> *this* problem. I have debugged and patched the v4.7 kernel.
OK thanks for the info.
> How I hit the problem: Just boot an that device and try to charge
> via usb.
OK so it's the twl4030 charger then I guess.
> Should I resubmit the patch with an extended commit message?
Well yeah it might be worth describing that it's the twl4030
charger that otherwise does not work properly.
More information about the Letux-kernel