<font size=2 face="sans-serif">Hello Nikolaus,</font>
<br>
<br><font size=2 face="sans-serif">>> one more suggestion for improvements
that should be made on the GTA04A5:</font>
<br><font size=2 face="sans-serif">>> Please make the solder contacts
of the MMCX connector more stable! Currently</font>
<br><font size=2 face="sans-serif">>> I can confirm that it's indeed
very easy to break them...   :-( </font>
<br><font size=2 face="sans-serif">></font>
<br><font size=2 face="sans-serif">> If you know a manufacturer of such
a connector that has the right height above the</font>
<br><font size=2 face="sans-serif">> PCB and is surface mountable...
The one we use was the best and only one we</font>
<br><font size=2 face="sans-serif">> could get hands on.</font>
<br>
<br><font size=2 face="sans-serif">perhaps a stupid question: Isn't it
possible to simply make bigger pads on the board and spend more soldering
paste on them? The used MMCX connector itself seems completely ok for me,
but its connections to the board are definitely too weak.</font>
<br>
<br><font size=2 face="sans-serif">Best regards</font>
<br><font size=2 face="sans-serif">   Sven</font>
<br><font size=2 face="sans-serif">  </font>
<br>
<br>
<br>
<br>
<br><font size=1 color=#5f5f5f face="sans-serif">Von:      
 </font><font size=1 face="sans-serif">"Dr. H. Nikolaus
Schaller" <hns@goldelico.com></font>
<br><font size=1 color=#5f5f5f face="sans-serif">An:      
 </font><font size=1 face="sans-serif">List for communicating
with real GTA04 owners <gta04-owner@goldelico.com></font>
<br><font size=1 color=#5f5f5f face="sans-serif">Datum:      
 </font><font size=1 face="sans-serif">19.02.2013 10:59</font>
<br><font size=1 color=#5f5f5f face="sans-serif">Betreff:    
   </font><font size=1 face="sans-serif">Re: [Gta04-owner]
MMCX connector</font>
<br><font size=1 color=#5f5f5f face="sans-serif">Gesendet von:    
   </font><font size=1 face="sans-serif">gta04-owner-bounces@goldelico.com</font>
<br>
<hr noshade>
<br>
<br>
<br>
<br><font size=3>Am 19.02.2013 um 10:47 schrieb Sven Dyroff:</font>
<br>
<br><font size=2 face="sans-serif">Hello Nikolaus,</font><font size=3>
<br>
</font><font size=2 face="sans-serif"><br>
one more suggestion for improvements that should be made on the GTA04A5:
Please make the solder contacts of the MMCX connector more stable! Currently
I can confirm that it's indeed very easy to break them...   :-(</font><font size=3>
</font>
<br>
<br><font size=3>If you know a manufacturer of such a connector that has
the right height above the PCB and is surface mountable... The one we use
was the best and only one we could get hands on.</font>
<br>
<br><font size=2 face="sans-serif"><br>
Am I right that it's hardly possible to reconnect an MMCX socket that has
lost its connections to the board?</font><font size=3> </font>
<br>
<br><font size=3>Well, it is possible. But needs a good microscope, a very
thin wire, a very calm hand and a lot of patience...</font>
<br>
<br><font size=2 face="sans-serif"><br>
Another question on external antenna:</font><font size=3> <br>
</font><font size=2 face="sans-serif"><br>
I see that "cat /sys/class/regulator/regulator.8/microvolts"
shows 2.8V but I cannot find gpio144 and gpio145 any more within "/sys/devices/virtual/gpio".
It's also not possible to get them within "/sys/class/gpio".
Where have these both gpios been moved to?</font><font size=3> </font>
<br>
<br><font size=3>I was also wondering recently. I think they are missing
in the 3.x kernels.</font>
<br>
<br><font size=3>Nikolaus</font>
<br><tt><font size=2>_______________________________________________<br>
Gta04-owner mailing list<br>
Gta04-owner@goldelico.com<br>
</font></tt><a href="http://lists.goldelico.com/mailman/listinfo/gta04-owner"><tt><font size=2>http://lists.goldelico.com/mailman/listinfo/gta04-owner</font></tt></a><tt><font size=2><br>
</font></tt>
<br>