<font size=2 face="sans-serif">Hello Radek,</font>
<br>
<br><font size=2 face="sans-serif">no, I haven't forgotten these two commands.
According to the messages "git submodule init" did lots of registering
some paths. "git submodule update" fetched several hundreds of
MB out of the net, compressed something and made some delta handling. Then
it finished.</font>
<br>
<br><font size=2 face="sans-serif">Due to your answer I entered the two
commands once again. "git submodule init" repeated the same procedure
as before. Also "git submodule update" did so: Fetching several
hundreds of MB out of the net, then telling something about compression
and deltas. But this time it continued to do even more. It checked out
about a dozen more packages, what it didn't do before. And this time I
really have a subdirectory "qt".</font>
<br>
<br>
<br><font size=2 face="sans-serif">1.) Question: Is it right, that I don't
get QtMoko v45 only, but also some very much older and also some newer
stuff? I got this in the log:</font>
<br>
<br><font size=2 face="sans-serif">From git://github.com/radekp/qt</font>
<br><font size=2 face="sans-serif"> * [new branch] 4.6-stable
-> origin/4.6-stable</font>
<br><font size=2 face="sans-serif"> * [new branch] 4.8
-> origin/4.8</font>
<br><font size=2 face="sans-serif"> * [new branch] master
-> origin/master</font>
<br><font size=2 face="sans-serif"> * [new branch] qt45-stable
-> origin/qt45-stable</font>
<br><font size=2 face="sans-serif"> * [new branch] qt46
-> origin/qt46</font>
<br><font size=2 face="sans-serif"> * [new branch] qtmoko-qt-4.7
-> origin/qtmoko-qt-4.7</font>
<br><font size=2 face="sans-serif"> * [new branch] qtmoko-qt47
-> origin/qtmoko-qt47</font>
<br><font size=2 face="sans-serif"> * [new branch] qtmoko-qt471
-> origin/qtmoko-qt471</font>
<br><font size=2 face="sans-serif"> * [new branch] qtmoko-v14
-> origin/qtmoko-v14</font>
<br><font size=2 face="sans-serif"> * [new branch] qtmoko-v15
-> origin/qtmoko-v15</font>
<br><font size=2 face="sans-serif"> * [new branch] qtmoko-v17
-> origin/qtmoko-v17</font>
<br><font size=2 face="sans-serif"> * [new branch] qtmoko-v18
-> origin/qtmoko-v18</font>
<br><font size=2 face="sans-serif"> * [new branch] qtmoko-v35
-> origin/qtmoko-v35</font>
<br><font size=2 face="sans-serif"> * [new branch] v4.7.4-qtmoko-v46
-> origin/v4.7.4-qtmoko-v46</font>
<br>
<br><font size=2 face="sans-serif">I think only "qt45-stable"
is the one what I searched for...</font>
<br>
<br>
<br><font size=2 face="sans-serif">2.) The call of configure still fails.
Now the message is:</font>
<br>
<br><font size=2 face="sans-serif">Testing the system Qt: FAIL</font>
<br><font size=2 face="sans-serif">Qt Extended requires Qt 4.3 or higher
to be installed.</font>
<br><font size=2 face="sans-serif">You must have qmake in your PATH.</font>
<br><font size=2 face="sans-serif">If your system's package manager does
not provide Qt 4 development libraries</font>
<br><font size=2 face="sans-serif">please see the Guide to Configuring
and Building Qt Extended for information</font>
<br><font size=2 face="sans-serif">on how to build Qt from the included
source.</font>
<br>
<br><font size=2 face="sans-serif">Alternatively, pass -build-qt to configure
and it will build Qt for you</font>
<br><font size=2 face="sans-serif">(and then bootstrap QBuild from that).</font>
<br><font size=2 face="sans-serif">make: *** [src/build/mkconf/configure]
Fehler 2</font>
<br>
<br>
<br><font size=2 face="sans-serif">Might it be that there's still something
missing? In order to give you a chance to check this, I attached the full
log of the second run of "git submodule init" and "git submodule
update" to this mail.</font>
<br>
<br><font size=2 face="sans-serif">Best regards</font>
<br><font size=2 face="sans-serif"> Sven</font>
<br><font size=2 face="sans-serif"> </font>
<br>
<br>
<br>
<br>
<br><font size=1 color=#5f5f5f face="sans-serif">Von:
</font><font size=1 face="sans-serif">Radek Polak <psonek2@seznam.cz></font>
<br><font size=1 color=#5f5f5f face="sans-serif">An:
</font><font size=1 face="sans-serif">gta04-owner@goldelico.com</font>
<br><font size=1 color=#5f5f5f face="sans-serif">Kopie:
</font><font size=1 face="sans-serif">Sven Dyroff <S.Dyroff@phytec.de></font>
<br><font size=1 color=#5f5f5f face="sans-serif">Datum:
</font><font size=1 face="sans-serif">05.07.2012 17:06</font>
<br><font size=1 color=#5f5f5f face="sans-serif">Betreff:
</font><font size=1 face="sans-serif">Re: [Gta04-owner]
Building QtMoko v45</font>
<br>
<hr noshade>
<br>
<br><tt><font size=3>On Thursday, July 05, 2012 12:52:42 PM Sven Dyroff
wrote:<br>
</font></tt>
<br><tt><font size=3>> Hello Radek,<br>
><br>
> I tried to build QtMoko by myself for the first time. Thanks to your
very<br>
> good README I managed to get nearly through the whole sequence from
the<br>
> scratch. There're only at least two things missing:<br>
><br>
> a) Very minor: "git clone" fails because you first need
to "apt-get<br>
> install" it. I only mention it here for completeness.<br>
><br>
> b) My problem: "../qtmoko/configure -system-qt -device neo"
fails because<br>
> it misses "../qtmoko/qtopiacore/qt". It's nice that within<br>
> "../qtmoko/qtopiacore" a README will be found that says,
that it's a link<br>
> named "qt" that has to placed here. But can you please provide
me/us the<br>
> destination? I'm afraid that the README-info "It contains the
Qt Embedded<br>
> source code that Qt Extended uses" is not sufficient for me...<br>
</font></tt>
<br><tt><font size=3>Hi Sven,<br>
havent you forget to run:<br>
</font></tt>
<br><tt><font size=3>git submodule init<br>
git submodule update</font></tt>
<br>
<br><tt><font size=3>After these two command the qtopiacore/qt directory
should be populated with<br>
Qt sources.<br>
</font></tt>
<br><tt><font size=3>This directory and few others are git submodules so
that we can track easily<br>
the upstream - you can even see it on github [1].<br>
</font></tt>
<br><tt><font size=3>Regards<br>
</font></tt>
<br><tt><font size=3>Radek<br>
</font></tt>
<br><tt><font size=3>[1] </font></tt><a href=https://github.com/radekp/qtmoko/tree/master/qtopiacore><tt><font size=3>https://github.com/radekp/qtmoko/tree/master/qtopiacore</font></tt></a>
<br>
<br>