[Gta04-owner] New Replicant 4.0 image

Adrien Dorsaz adrien at adorsaz.ch
Mon Dec 2 21:22:21 CET 2013


Hello,

Le lundi 02 décembre 2013 à 14:46 +0100, hermann.schwaerzler at chello.at a
écrit :
> Hello,
> 
> How about Wi-Fi? Should this work? It doesn't for me but I had not much time to
> test it.
> 

I don't know, but I've tried to copy /lib/firmware/libertas*
and /lib/firmware/sd* from the latest Debian-rootfs from GoldenDelicious
to /sys/etc/firmware (and to /sys/lib/firmware iirc, to be sure).
Then I was able to load libertas_sdio module and I got wlan0 interface
(I've done it using adb shell and su).

It seems not sufficient to get wifi on Replicant, but I don't know how
it works, e.g. if it needs special name as 'eth0' or if it should be
loaded on boot (I didn't find a file such /etc/modules like on standard
distribution).

Otherwise, the Replicant image seems well working (excepted known bugs).
Do you need we test/report anything with this image ?

I attach here a bit of my 'dmesg' command after libertas_sdio loaded.

Thanks,
Adrien
-------------- next part --------------
root at android:/ # modprobe libertas_sdio
root at android:/ # dmesg
<6>[    0.000000] Booting Linux on physical CPU 0x0
<6>[    0.000000] Initializing cgroup subsys cpu
<6>[    0.000000] Initializing cgroup subsys cpuacct
<5>[    0.000000] Linux version 3.12.0-rc7-gta04+ (hns at iMac.local) (gcc version 4.6.3 (GCC) ) #3 PREEMPT Fri Nov 29 12:18:33 CET 2013
<4>[    0.000000] CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=10c53c7d
<4>[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
<4>[    0.000000] Machine: GTA04
<6>[    0.000000] debug: ignoring loglevel setting.
<6>[    0.000000] cma: CMA: reserved 12 MiB at 9f000000
<4>[    0.000000] Memory policy: ECC disabled, Data cache writeback
<7>[    0.000000] On node 0 totalpages: 130816
<7>[    0.000000] free_area_init_node: node 0, pgdat c0693e60, node_mem_map c08bc000
<7>[    0.000000]   Normal zone: 1024 pages used for memmap
<7>[    0.000000]   Normal zone: 0 pages reserved
<7>[    0.000000]   Normal zone: 130816 pages, LIFO batch:31
<6>[    0.000000] CPU: All CPU(s) started in SVC mode.
<6>[    0.000000] OMAP3630 ES1.2 (l2cache iva sgx neon isp 192mhz_clk )
<7>[    0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
<7>[    0.000000] pcpu-alloc: [0] 0 
<4>[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 129792
<5>[    0.000000] Kernel command line: console=ttyO2,115200n8 vram=12M omapfb.vram=0:8M,1:4M omapfb.rotate_type=0 omapdss.def_disp=lcd rootwait twl4030_charger.allow_usb=1 musb_hdrc.preserve_vbus=1 log_buf_len=8M ignore_loglevel earlyprintk vt.global_cursor_default=0 console=ttyO2,115200n8 mpurate=800 mux=GTA04A3+ vram=12M omapfb.vram=0:8M,1:4M omapfb.mode=dvi:1024x768MR-16 at 60 omapfb.debug=y omapdss.def_disp=lcd ubi.mtd=4 root=/dev/mmcblk0p2 rw rootfstype=ext4,ext3,btrfs rootwait
<6>[    0.000000] gta04_init_bymux: GTA04A3+
<6>[    0.000000] log_buf_len: 8388608
<6>[    0.000000] early log buf free: 2095296(99%)
<6>[    0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
<6>[    0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
<6>[    0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
<4>[    0.000000] Memory: 489272K/523264K available (4563K kernel code, 306K rwdata, 1616K rodata, 213K init, 2203K bss, 33992K reserved, 0K highmem)
<5>[    0.000000] Virtual kernel memory layout:
<5>[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
<5>[    0.000000]     fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
<5>[    0.000000]     vmalloc : 0xe0800000 - 0xff000000   ( 488 MB)
<5>[    0.000000]     lowmem  : 0xc0000000 - 0xe0000000   ( 512 MB)
<5>[    0.000000]     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
<5>[    0.000000]     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
<5>[    0.000000]       .text : 0xc0008000 - 0xc061100c   (6181 kB)
<5>[    0.000000]       .init : 0xc0612000 - 0xc0647784   ( 214 kB)
<5>[    0.000000]       .data : 0xc0648000 - 0xc0694a60   ( 307 kB)
<5>[    0.000000]        .bss : 0xc0694a6c - 0xc08bba68   (2204 kB)
<6>[    0.000000] Preemptible hierarchical RCU implementation.
<6>[    0.000000] NR_IRQS:16 nr_irqs:16 16
<6>[    0.000000] IRQ: Found an INTC at 0xfa200000 (revision 4.0) with 96 interrupts
<6>[    0.000000] Total of 96 interrupts on 1 active controller
<6>[    0.000000] Clocking rate (Crystal/Core/MPU): 26.0/332/600 MHz
<6>[    0.000000] OMAP clockevent source: timer12 at 32768 Hz
<6>[    0.000000] sched_clock: 32 bits at 32kHz, resolution 30517ns, wraps every 131071999ms
<6>[    0.000000] OMAP clocksource: 32k_counter at 32768 Hz
<6>[    0.000000] Console: colour dummy device 80x30
<6>[    0.000274] Calibrating delay loop... 321.94 BogoMIPS (lpj=1609728)
<6>[    0.048492] pid_max: default: 32768 minimum: 301
<6>[    0.048645] Mount-cache hash table entries: 512
<6>[    0.049316] Initializing cgroup subsys debug
<6>[    0.049316] Initializing cgroup subsys freezer
<6>[    0.049407] CPU: Testing write buffer coherency: ok
<6>[    0.049713] Setting up static identity map for 0xc0450fe0 - 0xc0451038
<6>[    0.051055] devtmpfs: initialized
<6>[    0.053222] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3
<6>[    0.106170] pinctrl core: initialized pinctrl subsystem
<6>[    0.106506] regulator-dummy: no parameters
<6>[    0.107574] NET: Registered protocol family 16
<6>[    0.109497] DMA: preallocated 256 KiB pool for atomic coherent allocations
<6>[    0.109863] omap-gpmc omap-gpmc: GPMC revision 5.0
<6>[    0.111694] OMAP GPIO hardware version 2.5
<6>[    0.115081] cpuidle: using governor ladder
<6>[    0.115081] cpuidle: using governor menu
<4>[    0.115753] running gta04_init()
<6>[    0.115753] omap_mux_init: Add partition: #1: core, flags: 4
<6>[    0.123901] Reprogramming SDRC clock to 332000000 Hz
<6>[    0.127197] Revision GTA04A4
<4>[    0.129089] CONTROL_DEVCONF0 = 05000008
<4>[    0.129089] gta04_init done...
<6>[    0.129119] hw-breakpoint: debug architecture 0x4 unsupported.
<6>[    0.133361] OMAP DMA hardware revision 5.0
<6>[    0.140289] bio: create slab <bio-0> at 0
<6>[    0.153808] omap-dma-engine omap-dma-engine: OMAP DMA engine driver
<7>[    0.154174] hsusb2_reset: override min_uV, 1 -> 3300000
<7>[    0.154174] hsusb2_reset: override max_uV, 2147483647 -> 3300000
<6>[    0.154205] hsusb2_reset: 3300 mV 
<7>[    0.154296] reg-fixed-voltage reg-fixed-voltage.0.auto: hsusb2_reset supplying 3300000uV
<5>[    0.154998] SCSI subsystem initialized
<6>[    0.155212] usbcore: registered new interface driver usbfs
<6>[    0.155273] usbcore: registered new interface driver hub
<6>[    0.155487] usbcore: registered new device driver usb
<6>[    0.156890] omap_i2c omap_i2c.1: bus 1 rev4.4 at 2600 kHz
<6>[    0.158111] omap_i2c omap_i2c.2: bus 2 rev4.4 at 400 kHz
<6>[    0.158569] omap_i2c omap_i2c.3: bus 3 rev4.4 at 100 kHz
<6>[    0.159149] omap-iommu omap-iommu.0: mmu_isp registered
<6>[    0.159362] Advanced Linux Sound Architecture Driver Initialized.
<6>[    0.160797] Switched to clocksource 32k_counter
<6>[    0.171661] NET: Registered protocol family 2
<6>[    0.172454] TCP established hash table entries: 4096 (order: 3, 32768 bytes)
<6>[    0.172546] TCP bind hash table entries: 4096 (order: 2, 16384 bytes)
<6>[    0.172607] TCP: Hash tables configured (established 4096 bind 4096)
<6>[    0.172698] TCP: reno registered
<6>[    0.172698] UDP hash table entries: 256 (order: 0, 4096 bytes)
<6>[    0.172729] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
<6>[    0.173004] NET: Registered protocol family 1
<4>[    0.174743] gta04_opp_init 00000c00
<6>[    0.178344] squashfs: version 4.0 (2009/01/31) Phillip Lougher
<6>[    0.178466] msgmni has been set to 979
<6>[    0.180419] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
<6>[    0.180450] io scheduler noop registered
<6>[    0.180450] io scheduler deadline registered
<6>[    0.180480] io scheduler cfq registered (default)
<6>[    0.180786] platform regulator-gpio.0: Driver regulator-gpio requests probe deferral
<3>[    0.182922] pwm-backlight pwm-backlight: unable to request PWM, trying legacy API
<6>[    0.183624] OMAP DSS rev 2.0
<7>[    0.258361] OMAPFB: omapfb_probe
<3>[    0.258789] omapdss DPI error: can't get VDDS_DSI regulator
<3>[    0.258819] omapfb omapfb: failed to connect default display
<3>[    0.258850] omapfb omapfb: failed to init overlay connections
<7>[    0.258850] OMAPFB: free_resources
<7>[    0.258850] OMAPFB: free all fbmem
<3>[    0.259002] omapfb omapfb: failed to setup omapfb
<6>[    0.259063] platform omapfb: Driver omapfb requests probe deferral
<3>[    0.259185] reg-virt-consumer reg-virt-consumer.1: Failed to obtain supply 'vaux1': -517
<6>[    0.259216] platform reg-virt-consumer.1: Driver reg-virt-consumer requests probe deferral
<6>[    0.259826] platform omap_uart.0: Driver omap_uart requests probe deferral
<4>[    0.259857] GPS SET to 0
<4>[    0.260253] GPS SET to 0
<6>[    0.260284] omap_uart.1: ttyO1 at MMIO 0x4806c000 (irq = 89, base_baud = 3000000) is a OMAP UART1
<6>[    0.260955] omap_uart.2: ttyO2 at MMIO 0x49020000 (irq = 90, base_baud = 3000000) is a OMAP UART2
<6>[    0.981964] console [ttyO2] enabled
<6>[    0.993225] brd: module loaded
<6>[    0.999847] loop: module loaded
<6>[    1.004577] bmp085 2-0077: Successfully initialized bmp085!
<6>[    1.010589] at24 2-0050: 8192 byte 24c64 EEPROM, writable, 1 bytes/write
<6>[    1.022979] twl 1-0048: PIH (irq 23) chaining IRQs 338..346
<6>[    1.028930] twl 1-0048: power (irq 343) chaining IRQs 346..353
<7>[    1.036285] VUSB1V5: override min_uV, 1 -> 1500000
<7>[    1.041381] VUSB1V5: override max_uV, 2147483647 -> 1500000
<6>[    1.047210] VUSB1V5: 1500 mV normal standby
<7>[    1.052032] VUSB1V8: override min_uV, 1 -> 1800000
<7>[    1.057067] VUSB1V8: override max_uV, 2147483647 -> 1800000
<6>[    1.062927] VUSB1V8: 1800 mV normal standby
<7>[    1.067779] VUSB3V1: override min_uV, 1 -> 3100000
<7>[    1.072845] VUSB3V1: override max_uV, 2147483647 -> 3100000
<6>[    1.078674] VUSB3V1: 3100 mV normal standby
<6>[    1.085144] twl4030_usb twl4030_usb: Initialized TWL4030 USB module
<6>[    1.092376] vdd_mpu_iva: 600 <--> 1450 mV normal 
<6>[    1.097686] vdd_core: 600 <--> 1450 mV normal 
<6>[    1.103027] VMMC1: 1850 <--> 3150 mV at 3000 mV normal standby
<6>[    1.109771] VDAC: 1800 mV normal standby
<6>[    1.114868] VAUX2: 2800 mV normal 
<6>[    1.119079] VDVI: 1800 mV normal standby
<6>[    1.124206] VSIM: 2800 mV normal standby
<6>[    1.129150] VAUX1: 2500 <--> 3000 mV at 3000 mV normal standby
<6>[    1.136230] VAUX3: 2500 mV normal standby
<6>[    1.141296] VAUX4: 2800 <--> 3150 mV at 3150 mV normal standby
<6>[    1.149444] twl4030_madc twl4030_madc: clk disabled, enabling
<3>[    1.164062] Trying ONFI probe in 16 bits mode, aborting !
<6>[    1.169769] NAND device: Manufacturer ID: 0x2c, Chip ID: 0xbc (Micron NAND 512MiB 1,8V 16-bit), 512MiB, page size: 2048, OOB size: 64
<5>[    1.183197] Creating 5 MTD partitions on "omap2-nand.0":
<5>[    1.188781] 0x000000000000-0x000000080000 : "X-Loader"
<5>[    1.195648] 0x000000080000-0x000000260000 : "U-Boot"
<5>[    1.203124] 0x000000260000-0x000000280000 : "U-Boot Env"
<5>[    1.209716] 0x000000280000-0x000000680000 : "Kernel"
<5>[    1.218597] 0x000000680000-0x000020000000 : "File System"
<4>[    1.507507] GPS down
<4>[    1.510894] GPS up
<4>[    1.520843] GPS idle
<6>[    1.602600] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
<6>[    1.609741] ehci-omap: OMAP-EHCI Host Controller driver
<3>[    1.615661] unable to find transceiver
<3>[    1.681854] unable to find transceiver
<6>[    1.685852] ehci-omap ehci-omap.0: EHCI Host Controller
<6>[    1.691589] ehci-omap ehci-omap.0: new USB bus registered, assigned bus number 1
<6>[    1.699615] ehci-omap ehci-omap.0: irq 93, io mem 0x48064800
<6>[    1.721099] ehci-omap ehci-omap.0: USB 2.0 started, EHCI 1.00
<6>[    1.727386] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
<6>[    1.734527] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
<6>[    1.742095] usb usb1: Product: EHCI Host Controller
<6>[    1.747222] usb usb1: Manufacturer: Linux 3.12.0-rc7-gta04+ ehci_hcd
<6>[    1.753906] usb usb1: SerialNumber: ehci-omap.0
<6>[    1.759338] hub 1-0:1.0: USB hub found
<6>[    1.763366] hub 1-0:1.0: 3 ports detected
<6>[    1.768280] usbcore: registered new interface driver usb-storage
<7>[    1.778106] musb-hdrc: ConfigData=0xde (UTMI-8, dyn FIFOs, bulk combine, bulk split, HB-ISO Rx, HB-ISO Tx, SoftConn)
<7>[    1.789215] musb-hdrc: MHDRC RTL version 1.800 
<7>[    1.793975] musb-hdrc: setup fifo_mode 4
<7>[    1.798095] musb-hdrc: 28/31 max ep, 16384/16384 memory
<6>[    1.803680] musb-hdrc musb-hdrc.1.auto: MUSB HDRC host driver
<6>[    1.810028] musb-hdrc musb-hdrc.1.auto: new USB bus registered, assigned bus number 2
<6>[    1.818511] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
<6>[    1.825653] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
<6>[    1.833251] usb usb2: Product: MUSB HDRC host driver
<6>[    1.838439] usb usb2: Manufacturer: Linux 3.12.0-rc7-gta04+ musb-hcd
<6>[    1.845123] usb usb2: SerialNumber: musb-hdrc.1.auto
<6>[    1.851043] hub 2-0:1.0: USB hub found
<6>[    1.855010] hub 2-0:1.0: 1 port detected
<6>[    1.881652] mousedev: PS/2 mouse device common for all mice
<6>[    1.888458] input: tsc2007 as /devices/virtual/input/input0
<6>[    1.912200] input: bma150 as /devices/platform/omap_i2c.2/i2c-2/2-0041/input/input1
<6>[    1.921722] input: twl4030_pwrbutton as /devices/platform/omap_i2c.1/i2c-1/1-004b/twl4030_pwrbutton/input/input2
<6>[    1.933074] input: twl4030:vibrator as /devices/platform/omap_i2c.1/i2c-1/1-0049/twl4030-audio/input/input3
<6>[    1.944244] twl_rtc twl_rtc: Enabling TWL-RTC
<6>[    1.982421] twl_rtc twl_rtc: rtc core: registered twl_rtc as rtc0
<6>[    1.989196] i2c /dev entries driver
<6>[    1.993957] Driver for 1-wire Dallas network protocol.
<6>[    1.999694] omap_hdq omap_hdq: OMAP HDQ Hardware Rev 0.5. Driver in Interrupt mode
<6>[    2.080963] usb 1-2: new high-speed USB device number 2 using ehci-omap
<6>[    2.201354] APM Battery Driver
<6>[    2.214324] omap_wdt: OMAP Watchdog Timer Rev 0x31: initial timeout 60 sec
<6>[    2.222900] sdhci: Secure Digital Host Controller Interface driver
<6>[    2.229400] sdhci: Copyright(c) Pierre Ossman
<6>[    2.237548] usb 1-2: New USB device found, idVendor=0af0, idProduct=8800
<6>[    2.244689] usb 1-2: New USB device strings: Mfr=3, Product=2, SerialNumber=0
<6>[    2.252197] usb 1-2: Product: Globetrotter HSUPA Modem
<6>[    2.257598] usb 1-2: Manufacturer: Option N.V.
<6>[    2.601013] sdhci-pltfm: SDHCI platform and OF driver helper
<6>[    2.651367] ledtrig-cpu: registered to indicate activity on CPUs
<6>[    2.658477] usbcore: registered new interface driver usbhid
<6>[    2.664367] usbhid: USB HID core driver
<6>[    2.668975] hmc5883l initialized
<6>[    2.673370] ashmem: initialized
<6>[    2.676940] logger: created 256K log 'log_main'
<6>[    2.681976] logger: created 256K log 'log_events'
<6>[    2.687133] logger: created 256K log 'log_radio'
<6>[    2.692504] logger: created 256K log 'log_system'
<3>[    2.699310] itg3200 2-0068: invalid reg value 0x00
<6>[    2.705139] usbcore: registered new interface driver snd-usb-audio
<4>[    2.712615] si47xx_modinit
<4>[    2.715515] si47xx_platform_probe
<4>[    2.774688] TPS Voice IF is tristated
<6>[    2.781249] omap-twl4030 omap-twl4030:  twl4030-hifi <-> omap-mcbsp.2 mapping ok
<6>[    2.793518] input: gta04 Headset Jack as /devices/platform/omap-twl4030/sound/card0/input4
<6>[    2.803009] GTA04 OMAP3 SoC snd init
<4>[    2.807037] soc-audio soc-audio.0: ASoC: machine gta04 should use snd_soc_register_card()
<4>[    2.815704] soc-audio soc-audio.0: ASoC: Failed to create card debugfs directory
<6>[    2.824768] soc-audio soc-audio.0:  twl4030-hifi <-> omap-mcbsp.2 mapping ok
<6>[    2.833007] gta04-voice SoC init
<4>[    2.836608] soc-audio soc-audio.1: ASoC: machine gta04-voice should use snd_soc_register_card()
<6>[    2.847015] soc-audio soc-audio.1:  GTM601 <-> omap-mcbsp.4 mapping ok
<6>[    2.854797] gta04-headset SoC init
<4>[    2.858581] soc-audio soc-audio.2: ASoC: machine gta04-headset should use snd_soc_register_card()
<6>[    2.868988] soc-audio soc-audio.2:  W2CBW003 <-> omap-mcbsp.3 mapping ok
<6>[    2.876922] gta04-fm SoC init
<4>[    2.880279] soc-audio soc-audio.3: ASoC: machine gta04-fm should use snd_soc_register_card()
<4>[    2.889343] si47xx_probe
<6>[    2.893432] soc-audio soc-audio.3:  Si47xx <-> omap-mcbsp.1 mapping ok
<6>[    2.901306] oprofile: hardware counters not available
<6>[    2.906585] oprofile: using timer interrupt.
<6>[    2.911499] TCP: cubic registered
<6>[    2.914978] NET: Registered protocol family 17
<6>[    2.919708] NET: Registered protocol family 15
<6>[    2.925048] rfkill-regulator rfkill-regulator.0: GPS initialized
<5>[    2.931884] Key type dns_resolver registered
<6>[    2.942474] GTA04 camera: setup
<4>[    2.945831] mmc0: host does not support reading read-only switch. assuming write-enable.
<6>[    2.954650] fixed-dummy: no parameters
<7>[    2.958587] 2-0030: regulator.13/VAUX3 is 'vaux3' supply; fail regulator.15/fixed-dummy
<3>[    2.967071] reg-fixed-voltage reg-fixed-voltage.0: Failed to set supply vaux3
<6>[    2.974731] mmc0: new high speed SDHC card at address b368
<3>[    2.980987] reg-fixed-voltage reg-fixed-voltage.0: Failed to register regulator: -16
<4>[    2.989135] reg-fixed-voltage: probe of reg-fixed-voltage.0 failed with error -16
<6>[    2.997161] mmcblk0: mmc0:b368 USD   7.46 GiB 
<6>[    3.002929] ThumbEE CPU extension supported.
<6>[    3.007507]  mmcblk0: p1 p2 p3
<6>[    3.010864] SmartReflex Class3 initialized
<6>[    3.016632] registered taskstats version 1
<6>[    3.024108] VAUX3: disabling
<6>[    3.028686] VDVI: disabling
<6>[    3.032592] VDAC: disabling
<7>[    3.037384] OMAPFB: omapfb_probe
<3>[    3.041381] omapdss APPLY error: manager lcd is already connected to an output
<6>[    3.049224] fbcvt: 1024x768 at 60: CVT Name - .786M3-R
<7>[    3.054473] OMAPFB: create 1 framebuffers
<7>[    3.058685] OMAPFB: fb_infos allocated
<7>[    3.062652] OMAPFB: allocating 8388608 bytes for fb 0
<6>[    3.082031] mmc1: new SDIO card at address 0001
<7>[    3.088470] OMAPFB: allocated VRAM paddr 9f200000, vaddr df200000
<7>[    3.095031] OMAPFB: region0 phys 9f200000 virt df200000 size=8388608
<7>[    3.101745] OMAPFB: fbmems allocated
<7>[    3.105529] OMAPFB: check_fb_var 0
<7>[    3.109130] OMAPFB: max frame size 8388608, line size 1920
<7>[    3.114959] OMAPFB: xres = 480, yres = 640, vxres = 480, vyres = 640
<7>[    3.121673] OMAPFB: set_fb_fix
<7>[    3.126220] OMAPFB: fb_infos initialized
<7>[    3.130706] OMAPFB: set_par(0)
<7>[    3.130706] OMAPFB: set_fb_fix
<7>[    3.130737] OMAPFB: apply_changes, fb 0, ovl 0
<7>[    3.130737] OMAPFB: setup_overlay 0, posx 0, posy 0, outw 480, outh 640
<7>[    3.130737] OMAPFB: paddr 9f200000
<7>[    3.130859] OMAPFB: pan_display(0)
<7>[    3.130859] OMAPFB: setcmap
<7>[    3.130859] OMAPFB: setcmap
<4>[    0.529571] !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
<6>[    3.136108] Console: switching to colour frame buffer device 60x40
<7>[    3.136108] OMAPFB: pan_display(0)
<7>[    3.136108] OMAPFB: setcmap
<7>[    3.140930] OMAPFB: setcmap
<7>[    3.187896] OMAPFB: framebuffers registered
<7>[    3.192352] OMAPFB: apply_changes, fb 0, ovl 0
<7>[    3.196990] OMAPFB: setup_overlay 0, posx 0, posy 0, outw 480, outh 640
<7>[    3.203948] OMAPFB: paddr 9f200000
<7>[    3.207489] OMAPFB: create_framebuffers done
<7>[    3.211975] OMAPFB: mgr->apply'ed
<7>[    3.512329] OMAPFB: create sysfs for fbs
<7>[    3.516448] OMAPFB: create sysfs for fbs
<6>[    3.521453] omap_uart.0: ttyO0 at MMIO 0x4806a000 (irq = 88, base_baud = 3000000) is a OMAP UART0
<5>[    3.531555] UBI: default fastmap pool size: 200
<5>[    3.536285] UBI: default fastmap WL pool size: 25
<5>[    3.541290] UBI: attaching mtd4 to ubi0
<5>[    4.556427] UBI: scanning is finished
<5>[    4.573272] UBI: attached mtd4 (name "File System", size 505 MiB) to ubi0
<5>[    4.580444] UBI: PEB size: 131072 bytes (128 KiB), LEB size: 129024 bytes
<5>[    4.587585] UBI: min./max. I/O unit sizes: 2048/2048, sub-page size 512
<5>[    4.594543] UBI: VID header offset: 512 (aligned 512), data offset: 2048
<5>[    4.601562] UBI: good PEBs: 4044, bad PEBs: 0, corrupted PEBs: 0
<5>[    4.607849] UBI: user volume: 1, internal volumes: 1, max. volumes count: 128
<5>[    4.615325] UBI: max/mean erase counter: 5/1, WL threshold: 4096, image sequence number: 400334296
<5>[    4.624725] UBI: available PEBs: 0, total reserved PEBs: 4044, PEBs reserved for bad PEB handling: 80
<5>[    4.634490] UBI: background thread "ubi_bgt0d" started, PID 61
<6>[    4.646392] file system registered
<6>[    4.650634] android_usb gadget: Mass Storage Function, version: 2009/09/11
<6>[    4.657897] android_usb gadget: Number of LUNs=1
<6>[    4.662750]  lun0: LUN: removable file: (no medium)
<6>[    4.668121] android_usb gadget: android_usb ready
<6>[    4.678894] input: Phone button as /devices/platform/gpio-keys.0/input/input5
<6>[    4.687011] input: 3G Wakeup as /devices/platform/gpio-keys.1/input/input6
<6>[    4.696075] twl_rtc twl_rtc: setting system clock to 2013-12-02 18:01:39 UTC (1386007299)
<4>[    4.704711] sr_init: No PMIC hook to init smartreflex
<6>[    4.710388] smartreflex smartreflex.0: omap_sr_probe: SmartReflex driver initialized
<6>[    4.718719] smartreflex smartreflex.1: omap_sr_probe: SmartReflex driver initialized
<6>[    4.727355] ALSA device list:
<6>[    4.730468]   #0: gta04
<6>[    4.733062]   #1: gta04
<6>[    4.735656]   #2: gta04-voice
<6>[    4.738739]   #3: gta04-headset
<6>[    4.742126]   #4: gta04-fm
<6>[    4.763793] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
<6>[    4.772399] VFS: Mounted root (ext4 filesystem) on device 179:2.
<6>[    4.780700] devtmpfs: mounted
<6>[    4.784149] Freeing unused kernel memory: 212K (c0612000 - c0647000)
<4>[    4.813385] init (1): /proc/1/oom_adj is deprecated, please use /proc/1/oom_score_adj instead.
<11>[    4.967773] init: cannot open '/initlogo.rle'
<7>[    4.973052] OMAPFB: check_var(0)
<7>[    4.973083] OMAPFB: check_fb_var 0
<7>[    4.973083] OMAPFB: max frame size 8388608, line size 1920
<7>[    4.973083] OMAPFB: xres = 480, yres = 640, vxres = 480, vyres = 640
<7>[    4.973114] OMAPFB: set_par(0)
<7>[    4.973114] OMAPFB: set_fb_fix
<7>[    4.973114] OMAPFB: apply_changes, fb 0, ovl 0
<7>[    4.973114] OMAPFB: setup_overlay 0, posx 0, posy 0, outw 480, outh 640
<7>[    4.973114] OMAPFB: paddr 9f200000
<7>[    4.973175] OMAPFB: pan_display(0)
<7>[    4.973205] OMAPFB: setcmap
<7>[    4.973236] OMAPFB: pan_display(0)
<7>[    4.973236] OMAPFB: setcmap
<7>[    4.973236] OMAPFB: setcmap
<6>[    4.974212] android_work: sent uevent USB_STATE=CONNECTED
<7>[    4.978851] OMAPFB: setcmap
<6>[    4.982360] android_work: sent uevent USB_STATE=DISCONNECTED
<6>[    5.102294] android_work: sent uevent USB_STATE=CONNECTED
<3>[    5.115173] android_usb: already disabled
<6>[    5.119720] adb_bind_config
<6>[    5.123840] android_work: sent uevent USB_STATE=DISCONNECTED
<6>[    5.235168] android_work: sent uevent USB_STATE=CONNECTED
<6>[    5.241790] adb_open
<6>[    5.245391] android_usb gadget: high-speed config #1: android
<6>[    5.252716] android_work: sent uevent USB_STATE=CONFIGURED
<6>[    5.427459] warning: `rild' uses 32-bit capabilities (legacy support in use)
<6>[    5.796966] bq27000-battery bq27000-battery: support ver. 1.2.0 enabled
<7>[    6.298095] OMAPFB: check_var(0)
<7>[    6.298126] OMAPFB: check_fb_var 0
<7>[    6.298126] OMAPFB: max frame size 8388608, line size 960
<7>[    6.298126] OMAPFB: xres = 480, yres = 640, vxres = 480, vyres = 640
<7>[    6.298156] OMAPFB: set_par(0)
<7>[    6.298156] OMAPFB: set_fb_fix
<7>[    6.298156] OMAPFB: apply_changes, fb 0, ovl 0
<7>[    6.298156] OMAPFB: setup_overlay 0, posx 0, posy 0, outw 480, outh 640
<7>[    6.298156] OMAPFB: paddr 9f200000
<7>[    6.298217] OMAPFB: pan_display(0)
<7>[    6.298217] OMAPFB: setcmap
<7>[    6.298248] OMAPFB: pan_display(0)
<7>[    6.298278] OMAPFB: setcmap
<7>[    6.298278] OMAPFB: pan_display(0)
<7>[    6.298309] OMAPFB: setcmap
<7>[    6.298309] OMAPFB: setcmap
<7>[    6.371795] OMAPFB: user mmap region start 9f200000, len 8388608, off 0
<11>[   14.308593] init: untracked pid 149 exited
<6>[   17.434234] acc_open
<6>[   17.436950] acc_release
<4>[   22.748016] libertas_sdio: Unknown symbol lbs_notify_command_response (err 0)
<4>[   22.771087] libertas_sdio: Unknown symbol lbs_add_card (err 0)
<4>[   22.777221] libertas_sdio: Unknown symbol lbs_host_to_card_done (err 0)
<4>[   22.795837] libertas_sdio: Unknown symbol lbs_process_rxed_packet (err 0)
<4>[   22.811065] libertas_sdio: Unknown symbol lbs_remove_card (err 0)
<4>[   22.817474] libertas_sdio: Unknown symbol lbs_debug (err 0)
<4>[   22.830993] libertas_sdio: Unknown symbol lbs_suspend (err 0)
<4>[   22.837036] libertas_sdio: Unknown symbol lbs_cmd_copyback (err 0)
<4>[   22.859771] libertas_sdio: Unknown symbol lbs_get_firmware_async (err 0)
<4>[   22.867187] libertas_sdio: Unknown symbol lbs_queue_event (err 0)
<4>[   22.874176] libertas_sdio: Unknown symbol lbs_start_card (err 0)
<4>[   22.914184] libertas_sdio: Unknown symbol __lbs_cmd (err 0)
<4>[   22.920074] libertas_sdio: Unknown symbol lbs_stop_card (err 0)
<4>[   22.947479] libertas_sdio: Unknown symbol lbs_resume (err 0)
<6>[   23.186767] cfg80211: Calling CRDA to update world regulatory domain
<6>[   23.205841] lib80211: common routines for IEEE802.11 drivers
<7>[   23.243469] lib80211_crypt: registered algorithm 'NULL'
<6>[   23.373321] libertas_sdio: Libertas SDIO driver
<6>[   23.378082] libertas_sdio: Copyright Pierre Ossman
<6>[   25.132843] libertas_sdio mmc1:0001:1 (unregistered net_device): 00:19:88:42:95:8c, fw 9.70.3p36, cap 0x00000303
<6>[   25.351257] libertas_sdio mmc1:0001:1 (unregistered net_device): PREP_CMD: command 0x00a3 failed: 2
<6>[   25.421936] libertas_sdio mmc1:0001:1 wlan0: Marvell WLAN 802.11 adapter
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 198 bytes
Desc: This is a digitally signed message part
URL: <http://lists.goldelico.com/pipermail/gta04-owner/attachments/20131202/78acaf23/attachment-0001.bin>


More information about the Gta04-owner mailing list