[Gta04-owner] booting 3.5-rcX kernel failed

Belisko Marek marek.belisko at gmail.com
Wed Jun 20 08:14:53 CEST 2012


On Wed, Jun 20, 2012 at 2:44 AM, Denis 'GNUtoo' Carikli
<GNUtoo at no-log.org> wrote:
> On Wed, 2012-06-20 at 01:18 +0200, Denis 'GNUtoo' Carikli wrote:
>> On Tue, 2012-06-19 at 22:19 +0100, Belisko Marek wrote:
>> > On Tue, Jun 19, 2012 at 10:13 PM, Denis 'GNUtoo' Carikli
>> > <GNUtoo at no-log.org> wrote:
>> > > On Mon, 2012-06-18 at 22:29 +0100, Belisko Marek wrote:
>> > >> Enable earlyprintk didn't say anything.
>> > > how did you enable earlyprintk. it require an argument in cmdline.
>> > I've added also earlyprintk to kernel cmdline but still nothing.
>> then try to look what's in the buffer of dmesg like that:
>> I guess the virtual->physical prefix is 0x8 for omap(to check) but if
>> so, you could try that:
>> grep __log_buf System.map
>> c059f7a0 b __log_buf
>> remove the starting c and replace it by 0x8(or whatever the prefix is)
I've found this one: https://lkml.org/lkml/2012/6/17/52 but still
can't get no console output.
I verify 3.4 and this one I can boot properly (to avoid my error ;)).
Any thoughts?
>>
>> then md that address in uboot and press enter many times.
>> The dmesg should appear.
> Sorry that won't work.
> The gta04 lacks a reset button...
>
> Denis.
>
> _______________________________________________
> Gta04-owner mailing list
> Gta04-owner at goldelico.com
> http://lists.goldelico.com/mailman/listinfo/gta04-owner

marek

-- 
as simple and primitive as possible
-------------------------------------------------
Marek Belisko - OPEN-NANDRA
Freelance Developer

Ruska Nova Ves 219 | Presov, 08005 Slovak Republic
Tel: +421 915 052 184
skype: marekwhite
twitter: #opennandra
web: http://open-nandra.com


More information about the Gta04-owner mailing list