[Gta04-owner] 3D printed GTA04 case

David Lanzendörfer david.lanzendoerfer at o2s.ch
Wed Jan 11 11:58:51 CET 2012

> Hi,

> on
> http://misc.andi.de1.cc/f1.jpg
> http://misc.andi.de1.cc/f2.jpg
> there are first tries to print your stl file with my reprap.

> It  was printed using PLA. I used the tower module of skeinforge to reduce
> head movings across the empty space and so reduce oozing.
>  One of the bridges  failed, it seems that there is not enough space where the
> bridge can touch the two supports. It feels more soft than the original one.
> Maybe using ABS might improve things.

Maybe you could just try to replace the snapping mechanism by M2-screwholes?
> Greetings
> Andreas Kemnade
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 198 bytes
Desc: This is a digitally signed message part.
URL: <http://lists.goldelico.com/pipermail/gta04-owner/attachments/20120111/1034ce4e/attachment-0001.bin>

More information about the Gta04-owner mailing list