[Gta04-owner] gta04 board can boot only outside freerunner case

Christoph Mair christoph.mair at gmail.com
Sun Apr 1 22:00:39 CEST 2012


On Sun, Apr 1, 2012 at 9:58 PM, Christoph Mair <christoph.mair at gmail.com> wrote:
> Connect a 5V, >=1A power supply to these contacts (jou can use the
> RS232 cable, if available). This setup will only boot with a battery.

Make sure that the voltage at these pins does not exceed 6.5V! It is
the absolute maximum which the hardware can tolerate without going up
in smoke. These two pins do not have integrated security circuits to
ensure this condition.

Christoph


More information about the Gta04-owner mailing list